VRC Terofire Fire Detection

Microprocessor based conventional fire alarm control panel. One detection zone. One set of volt-free changeover contacts operable on fire head removal via zener clamp or active end-of-line unit. Open collector fault output zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 10. System voltage: 28.4 V DC. Panel weight inclusive of batteries: 4.5 kg. Panel dimensions: 285 x 237 x 97 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. Four detection zones. One-man test facility. Two sets of volt-free changeover contacts operable on fire. Head removal via zener clamp or active end-of-line unit. Non-latching zones facility. Open collector fault output. Class change input . Zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 16. System voltage: 28.4 V DC. No. of sense zones: 4. Panel weight inclusive of batteries: 5 kg. Panel dimensions: 285 x 237 x 97 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. Eight detection zones. One-man test facility. Two sets of volt free changeover contacts operable on fire. One set of volt free changeover contacts operable on fault. Head removal via zener clamp or active end of line unit. Non-latching zones facility. Class change input. Zone and alarm disablement.  Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 16. System voltage: 28.4 VDC. No. of sense zones: 8. Panel weight inclusive of batteries: 10 kg. Panel dimensions: 335 x 265 x 87 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. Six detection zones. One-man test facility. Two sets of volt free changeover contacts operable on fire. Head removal via zener clamp or active end-of-line unit. Non-latching zones facility. Open collector fault output. Class change input . Zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 16. System voltage: 28.4 V DC. No. of sense zones: 4. Panel weight inclusive of batteries: 5 kg. Panel dimensions: 285 x 237 x 97 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. One-man test facility. Two sets of volt free changeover contacts operable on fire. Open collector fault output. Head removal via zener clamp or active end of line unit. Non-latching zones facility. Class change input. Zone and alarm disablement . 28 V 125 mA fused supply permanently available. 16 x 2 backlit LCD. System voltage: 28.4 V DC. No. of sense zones: 6. No. of alarm zones: 2. Panel weight inlcuding batteries: 7.5 kg. Panel dimensions: 330 x 300 x 80 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. Two detection zones. One set of volt free changeover contacts operable on fire head removal via zener clamp or active end-of-line unit. Open collector fault output zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 10. System voltage: 28.4 V DC. Number of sense zones: 1. Panel weight inclusive of batteries: 4.5 kg. Panel dimensions: 285 x 237 x 97 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. One man test facility. Two sets of volt free changeover contacts operable on fire. Open collector fault output. Head removal via zener clamp or active end of line unit. Non-latching zones facility. Class change input. Zone and alarm disablement . 28 V 125 mA fused supply permanently available. 16 x 2 backlit LCD. System voltage: 28.4 V DC. Number of sense zones: 6. Number of alarm zones: 4. Maximum number of detectors per zone: 30. Maximum number of sounders per zone: 12. Panel weight including batteries: 7.5 kg. Panel dimensions: 330 x 300 x 80 mm. Complies with EN54-2 & 4.

Optical smoke detector with advanced electronic technology used to minimise false alarms. Wide operating voltage 9-33 Volts. Designed to meet approvals worldwide. Compatible with a wide range of bases. Attractive design. Can be fitted to a duct-sampling unit. Remote LED output. Lockable to base to stop unauthorised removal. Alarm trigger condition: 3% per metre smoke obscuration. Alarm indication: Clear LED, red in alarm. Supply voltage: 9-33 Volts. Detector size: 10 mm diameter x 40 mm deep. IP 43. LPCB approved to EN54.

Microprocessor based conventional four zone fire alarm control panel. One-man test facility. Two sets of volt-free changeover contacts operable on fire. Open collector fault output. Head removal via zener clamp or active end-of-line unit. Non-latching zones facility. Class change input. Zone and alarm disablement . 16 x 2 backlit LCD. No. of sense zones: 4. No. of alarm zones: 2. Maximum number of sounders per zone: 12. System voltage: 28.4 V DC. Panel weight including batteries. 7.5 kg. Panel dimensions: 330 x 300 x 80 mm. Complies with EN54-2 & 4.

Single loop analogue addressable fire alarm panels, ideal for 2 wire systems. All outputs trigger on an alarm signal from any call point or detector. Requires no set up programming or data upload. User text can be entered via the built in keyboard. Designed to EN54 Parts 2 & 4. 500 mA loop working capacity. Over current loop shutdown at 750 mA. 4 x 20 LCD. Devices mapped into 4 zones. User-friendly controls. Membrane fascia with tactile switches.    

Single thermistor fixed temperature heat detector. Wide operating voltage: 9-33 Volts. Compatible with a wide range of bases. Attractive design. Remote LED output. Lockable to base to stop unauthorised removal. IP 43. Alarm trigger condition: 90°C. Designed to meet approvals worldwide.  

Microprocessor based conventional fire alarm control panel. One-man test facility. Two sets of volt-free changeover contacts operable on fire. Open collector fault output. Head removal via zener clamp or active end of line unit. Non-latching zones facility. Class change input. Zone and alarm disablement . 28 V 125 mA fused supply permanently available. 16 x 2 backlit LCD. System voltage: 28.4 V DC. Number of sense zones: 8. Number of alarm zones: 2. Maximum number of sounders per zone: 12. Maximum number of detectors per zone: 30. Panel weight including batteries: 7.5 kg. Panel dimensions: 330 x 300 x 80 mm. Complies with EN54-2 & 4.

Microprocessor based conventional fire alarm control panel. Twelve detection zones. One-man test facility. Two sets of volt-free changeover contacts operable on fire. One set of volt-free changeover contacts operable on fault. Head removal via zener clamp or active end-of-line unit. Non-latching zones facility. Zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 16. System voltage: 28.4 V DC. Number of sense zones: 12. Panel weight inclusive of batteries: 10 kg. Panel dimensions: 335 x 265 x 87 mm. Complies with EN54-2 & 4.

Single loop analogue addressable fire alarm panel, ideal for 2 wire systems. Designed so that all outputs will trigger on an alarm signal from any call point or detector. Requires no set up programming or data upload. User text can be entered via the built in keyboard. Designed to EN54 Parts 2 & 4. 500 mA loop working capacity. Over current loop shutdown at 750 mA. 4 x 20 LCD. Devices mapped into 8 zones. User-friendly controls. Membrane fascia with tactile switches.    

Microprocessor based conventional fire alarm control panel. Two detection zones. One set of volt free changeover contacts operable on fire. Head removal via zener clamp or active end-of-line unit. Open collector fault output. Zone and alarm disablement. Maximum number of detectors per zone: 30. Number of alarm zones: 2. Maximum number of sounders per zone: 10. System voltage: 28.4 V DC. Panel dimensions: 234 x 225 x 85 mm. Complies to EN54-2 & 4.  

LPCB approved microprocessor based conventional fire alarm control panel. Features: Complies with EN54 parts 2 & 4 Microprocessor based Integral charger Delay overide facility Software head removal facility Battery short circuit protection Zone circuit protection Fire auxiliary changeover relay Fault changeover relay Class change  Zone isolate facilities One man test facility Programmable external sounder delay (0-9 minutes, 1 minute increments).

Optical smoke and heat detector with advanced photoelectric smoke sensing technology. Multisensor is used for a wide range of applications and is highly immune to false alarms. Durable sensor head. Excellent smoke access. Reset time: < 1 second. Alarm indicator: Red LED continuous emission. Dual LEDs for 360° visibility. Easy installation and maintenance. Modern design for any décor. Detection Range: 100 square metres rating for smoke sensor; 50 square metres rating for heat sensor. Compliance: EN 54/7:2000 standard.