System Sensor Fire Detection

System Sensor BEAM200S is a single-ended reflected beam smoke detector, uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain.The BEAM200S detector is equipped with an added feature, an integral sensitivity test feature that uses a test filter attached to a Servo motor inside the detector optics. Using the remote test station RTS451/RTS151, the motor is activated and moves the filter in the pathway of the light beam, thereby testing detector sensitivity. 

Offers an attractive low silhouette design. Has multiple configurations available. Uses single and dual circuit models. Has a fixed temperature and combination, or a fixed temperature/rate-of-rise activation. Displays readily visible alphanumeric markings. Includes a standard 3.5” (8.8 cm) or a 4” (10.16 cm) octagonal mounting. Installed as a single gang or a standard 4” (10.16 cm) square mounting with the support of a plaster ring.

DescriptionModel 2151 (photoelectric sensor) and model 2151T (photoelectric sensor with thermal) can be used with a variety of adapter bases in several wiring configurations and voltages. Other features include: low current draw, stable performance in high air ve locities, built-in tamper resistant base design, remote LED option, removable cover and built-in test switch. The 100 series is designed to meet the performance criteria designated by UL. The sensing chamber is sealed against back pressure air flow. Th e chamber top is covered by a one piece molded screen which minimizes the entry of dirt and insects. This screen can be removed for cleaning. Additional key features include a variety of mounting bases and a full line of accessories. All 100 Series pho toelectric smoke detectors contain a unique optical sensing chamber designed to sense smoke particles produced by a wide range of combustion sources. A custom integrated circuit incorporates signal processing to reduce false alarms. Model 2151 photoele ctric detector’s unique optical sensing chamber is engineered to sense smoke by a wide range of combustion sources. Dual electronic thermistors add 135ºF fixed temperature thermal sensing on model 2151T.

DescriptionModels 5351B, 5351B-IV, 5351RB, 5351RB-IV, 5351H, and 5351H-IV are field programmable intelligent sensors that use a state-of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection with 50-foot spacing capability as approved by UL 521. The intelligent temperature sensor can be programmed as either a 135°F fixed temperature sensor, a rate of rise and 135°F fixed temperature sensor or a 190°F high temperature sensor through the Fire Alarm Control Panel (FACP).

SWIFT® red, ceiling mount AV Base for use with System Sensor L-Series AV devices. NOTE: SWIFT wireless devices are part of an addressable fire alarm system, please consult your Fire Alarm Control Panel Manufacturer for compatibility.  

DescriptionModels 5351B, 5351B-IV, 5351RB, 5351RB-IV, 5351H, and 5351H-IV are field programmable intelligent sensors that use a state-of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection with 50-foot spacing capability as approved by UL 521. The intelligent temperature sensor can be programmed as either a 135°F fixed temperature sensor, a rate of rise and 135°F fixed temperature sensor or a 190°F high temperature sensor through the Fire Alarm Control Panel (FACP).

SWIFT® white, ceiling mount AV Base for use with System Sensor L-Series AV devices. NOTE: SWIFT wireless devices are part of an addressable fire alarm system, please consult your Fire Alarm Control Panel Manufacturer for compatibility.

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Sensor Conventional or Addressable : Conventional

System Sensor 4WTA-B is a 4-wire photoelectric smoke detector with thermal sensor and built-in sounder. The detector features in-line terminals, flexible mounting options, and simplified sensitivity measurement. It also features remote maintainance signaling and dual colour LEDs.

SWIFT® Synchronization Module. NOTE: SWIFT wireless devices are part of an addressable fire alarm system, please consult your Fire Alarm Control Panel Manufacturer for compatibility.  

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Sensor Conventional or Addressable : Conventional

System Sensor 2251TB is a photoelectric smoke detector with thermal sensing. The point ID capability enables detector address to be set with decade address switches to provide exact detector locations. The sensitivity of detector can be programmed using the control panel software to suit the environment. In addition, detector sensitivity is continually monitored and reported to the panel.

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Sensor Conventional or Addressable : Conventional

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Senso Conventional or Addressable : Conventional

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Sensor Conventional or Addressable : Conventional

System Sensor COSMO-4W is a 4-wire CO/photoelectric smoke detector in a single system-connected device. The detector is compatible with a wide range of control panels with the use of required Interface Module. It sends distinct smoke and CO signals to the panel. It also features LEDs that display both CO and smoke status. The external IR LED provides extended range sensitivity testing.

Select Series Intelligent Remote Test Capable Smoke DetectorSelect Series photoelectric smoke detector with remote test capability are designed for use with DNR(W) Duct Smoke Detectors. Features & Benefits: UL 268 7th Edition and UL 268A listed Modern profile Analog communications Low standby current Rotary address switches Dual LEDs for 360° visibility Expanded color options

System Sensor FAAST 8251F smoke detector combines dual source (blue LED and infra-red laser) optical smoke detection with fire alarm control panel connectivity via CLIP mode to provide high sensitivity to fire with intelligent reporting capabilities; all while providing enhanced immunity to nuisance particulate.. As a result the detector can provide Early Warning and Very Early Warning Fire Detection while seamlessly integrating with an existing fire signalling circuit.. It also enables maximum control over mission-critical and challenging environments.

System Sensor 2251TMB is a photoelectric smoke detector with thermal detection. It uses advanced onboard software to combine the signals from the photo and thermal elements to create a true multi-criteria detector capable of rejecting nuisance sources, but still responding quickly to real fires. Separate photo and thermal elements also allow the detector to provide different responses to smoke or heat. In addition, the detector can adjust its sensitivity according to its environment.

System Sensor 4WTR-B is a 4-wire photoelectric smoke detector with thermal sensor and Form C relay. The detector features in-line terminals, flexible mounting options, and simplified sensitivity measurement. It also features remote maintainance signaling and dual colour LEDs.

SWIFT® battery cartridge bulk pack for use with SWIFT AV bases and SWIFT pull stations. NOTE: SWIFT wireless devices are part of an addressable fire alarm system, please consult your Fire Alarm Control Panel Manufacturer for compatibility.

Select Series photoelectric smoke detector with 135°F fixed temperature thermal sensing provides the features and flexibility you need for commercial fire and security systems. Features & Benefits: UL 268 7th Edition and UL 521 listed Modern profile Analog communications Low standby current Rotary address switches Dual LEDs for 360° visibility Expanded color options

System Sensor D4S is a 4-wire photoelectric sensor. The power board of the D4240 may be used to monitor a second sensor, D4S, simultaneously.

Brand : Farenhyt|Fire-Lite|Gamewell-FCI|Notifier|Silent Knight|System Sensor Conventional or Addressable : Conventional

System Sensor CO1224T 4-wire carbon monoxide detector with RealTest technology uses a highly accurate and reliable electrochemical sensing cell to provide early warning of dangerous CO levels. When dangerous amounts of CO are detected, the CO1224T detector alerts residents by sounding and flashing a temp 4 signal alarm. With 24/7 central station monitoring, residents are guaranteed protection whether    they are away from home, sleeping, or already suffering from the effects of CO.

SWIFT® white, wall mount AV Base for use with System Sensor L-Series AV devices. NOTE: SWIFT wireless devices are part of an addressable fire alarm system, please consult your Fire Alarm Control Panel Manufacturer for compatibility.

System Sensor 5251B is a fixed temperature thermal detector that uses thermistor sensing circuit to produce 135°F fixed and rate-of-rise thermal detection in low-profile packages. The thermal detector provides cost-effective, intelligent property protection in a variety of applications.

System Sensor 4WITAR-B is a 4-wire photoelectric smoke detector with isolated thermal sensor, built-in sounder, and Form C relay. The detector features in-line terminals, flexible mounting options, and simplified sensitivity measurement. It also features remote maintainance signaling and dual colour LEDs.