Siemens Fire Detection

Siemens DO1133A is a smoke detector with increased sensitivity for use in air sampling smoke detection systems. With the auto-addressable feature, no dip switch or punch card settings have to be made. It has a built-in isolator that enables the fire control panel to localise short circuits and open lines during commissioning.

Siemens FDOOT221 is a multi-sensor smoke detector works according to the scattered-light principle with two sensors, optical forward and backward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects both dark and light smoke particles. Two additional heat sensors increase the fire detector’s immunity to deceptive phenomena. Signal processing with detection algorithms (DA).

Siemens FDT241 is a heat detector that monitors rooms in which a quick temperature rise is expected in case of fire, or when optical detection is difficult. It is equipped with two redundant heat sensors, so that in case of failure of one sensor, the detector still complies with the highest alarm class.

Siemens MXL is a fire alarm system that can meet the requirements of a wide range of applications. It is a widely accepted analog fire protection solution with a significant installed base in the marketplace. With an amazingly flexible architecture, the MXL is the one system that can meet the requirements of a wide range of applications.

Siemens DOW1171 is a radio smoke detector that includes built-in diagnostic algorithms with automatic self-test. It has high immunity to false alarms and ambient influences, high-quality opto-electronic sensor system, automatic compensation of soiling.

Siemens OOH740 is a multi sensor smoke detector used for the detection of flaming fires caused by the combustion of liquid and solid matters, as well as smoldering fires. For reliable fire detection in environments with deceptive phenomena. It works according to the scattered-light principle with two sensors, optical forward and backward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects both dark and light smoke particles. Two additional heat sensors increase the fire detector’s immunity to deceptive phenomena.

Siemens DF1191 is a infrared flame detector suitable for simple applications, additional to smoke detectors. It is only used without sources of interference such as sun, halogen light, blackbody radiation.

Siemens DO1104A is a smoke detector with higher response sensitivity for the early warning of smoke-forming, flaming fires and smoldering fires. It is applicable in hospital rooms, archives, museums etc.

Siemens TXR-320 is a fire alarm system configurable for single-hazard and dual-hazard applications. It releases sprinkler services and/or Sinorix™ agent release systems. It is the first conventional releasing panel to leverage the benefits of the new Siemens Multi-Criteria Conventional Detection Technology. The easy-to-use configuration tool comes with 13 preconfigured modes of operation providing an intuitive panel programming experience.

Siemens OP720 is an optical smoke detector used for the detection of smoke-generating flaming and smoldering fires. It works according to the scattered-light principle with an optical forward scattering sensor.

Siemens DT1102A-Ex is a heat detector used for the monitoring of explosion-hazard areas of zones 1 and 2 with a maximum ambient temperature of 70 °C. It is the right heat detector for locations where large temperature fluctuations and high temperatures occur. It continuously measures the ambient temperature and reacts if defined maximum values are exceeded.

Siemens FDT221 is a heat detector used for monitoring of rooms in which a quick temperature rise is expected in case of fire, or when optical detection is difficult. It is equipped with two redundant heat sensors, so that in case of failure of one sensor, the detector still complies with the highest response class. Measures the ambient temperature and the temperature in the detector housing, so that a temperature increase can be detected immediately. Signal processing with detection algorithms (DA).

Siemens OP320C is an optical smoke detector that has an excellent all-round performance within the Synova 300 range. It has a completely new optical chamber and the latest electronics which open up new dimensions in safety and functionality.

Siemens FDO241 is a smoke detector used for early detection of smoke-generating, flaming and smoldering fires. It works according to the scattered-light principle with one sensor, optical forward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects smoke particles.

Siemens DO1101A is a smoke detector that has  a high performance opto-electronic sensor system. It has uniform response behavior for different types of fire. It has a high resistance to soiling and temperature fluctuation.

Siemens DF1192 is a infrared flame detector achieves excellent detection reliability while maintaining the highest immunity to interference radiation and sunlight. In order to safeguard against a possible decision emergency, the detector contains an additional emergency activation channel. It detects smokeless liquid and gas fires as well as smoke-generating open fires resulting from the combustion of carbonaceous materials such as wood, synthetics, gases, oil products, etc.

Siemens FDO221 is a smoke detector that works according to the scattered-light principle with one sensor, optical forward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects smoke particles. Signal processing with detection algorithms (DA).

Siemens FDOOT241-9 is a multi-sensor smoke detector that works according to the scattered-light principle with two sensors, optical forward and backward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects both dark and light smoke particles. Two additional heat sensors increase the fire detector’s immunity to deceptive phenomena.

Siemens FireFinder XLS System is a fire alarm that help protects people and property like a FireFinder® XLS system. When a fire is detected anywhere in the building, the panel is instantly alerted. In less time than it takes to draw a single breath, alarms are activated and emergency control operations are engaged, including fire door closure, elevator capture and air handler shut-off. When first responders arrive, the FireFinder XLS displays the critical information they need to make potentially life-saving decisions, courtesy of an industry-leading 6-inch, full-color LCD that provides crystal-clear, easy-to-read text on screens color-coded by event type.