Siemens Fire Detection

Siemens XCH1001-A is a cover set used for fire detection system.

Siemens DBW1171 is a base for radio smoke detector made of impact and scratch-proof plastic and environmentally safe materials.

Siemens OOHC740 is a fire and CO detector for very early and reliable detection of emerging fire, due to analysis of the three criteria smoke, heat and gas. It has a very fast response to all carbon monoxide (CO) generating fires and very early and reliable alarming in environments with deceptive phenomena. It works according to the scattered-light principle with two sensors, optical forward and backward scattering.

Siemens HI322C is a heat detector for locations in which there are large fluctuations in temperature. It continuously measures the ambient temperature and reacts if there is a sustained overshoot of defined maximum values.

Siemens DT1102A is a heat detector that has precise maximum temperature alarm activation with a quality thermo sensor. It has response behavior immune to deceptive phenomena with rapid and slow increases in temperature. For the monitoring of rooms and installations in which high ambient temperatures can be expected up to +70 °C.

Siemens DO1103A is a smoke detector with considerably higher response sensitivity for use in air sampling smoke detection systems.

Siemens FDCW221 is a radio fire detection system used in situations where the user wants to avoid wires and their installation. In addition it means less interruption of operation and high flexibility for extensions and changes. High transmission reliability by radio transmission in SRD band (Short Range Device), a reserved frequency band with defined user rules. 80 channels are available.

Siemens HI112 is a heat detector used for areas having high levels of dirt or temperature fluctuation that may lead to false activating with smoke detectors.

Siemens DF11 is a infrared flame detector  used for special applications. The infrared flame detector detects smokeless liquid and gas fires as well as smoke-generating open fires resulting from the combustion of carbonaceous materials such as wood, synthetics, gases, oil products, etc.

Siemens FDFB291 is an infrared flame detector base made of a robust, glass fiber-reinforced, plastic housing which provides the required isolated installation of the detector. The base contains screwless terminals, isolated auxiliary terminals and six M20 cable entry possibilities for cable glands.

Siemens OH110 is a multi sensor fire detector used for the detection of flaming fires caused by the combustion of liquid and solid matters, as well as smoldering fires and for reliable fire detection in environments with deceptive phenomena.

Siemens FDF is an infrared flame detector used for special applications. It detects smokeless liquid and gas fires as well as smoke-generating open fires resulting from the combustion of carbonaceous materials such as wood, synthetics, gases, oil products, etc. The LE3 test lamp is used to make a performance check on the infrared flame detector at a distance of up to 10 m.

Siemens DT1101A is a heat detector that has precise maximum temperature alarm activation with a quality thermo sensor. It has response behavior immune to deceptive phenomena with rapid and slow increases in temperature. For the monitoring of rooms and installations where in the event of fire, a rapid increase in temperature can be expected, or other types of detector cannot be used due to operational reasons.

Siemens HI722 heat detector suitable in areas, in which temporary high variations in temperature arise. Measures the ambient temperature, when the maximum temperature is exceeded the detector sends a danger signal to the fire control panel.

Siemens SXL-EX is a fire alarm system that incorporates innovative, high quality design, and will provide years of reliable fire protection in small buildings and structures. It is developed to meet the varied fire detection needs of schools, municipal buildings, nursing homes, apartment buildings, warehouses, small office buildings and department stores; virtually anywhere a cost efficient, general purpose fire control panel is required.

Siemens OP110 is a optical smoke detector used for the detection of smoke-generating flaming and smoldering fires.

Siemens HI320C is a heat detector with extremely reliable rate of rise and maximum temperature detector for demanding applications. It is characterised by reliable response behavior, not only in the event of temperature rises which are slow, but also where the temperature rises are fast.

Siemens HI110 is a heat detector used for areas having high levels of dust, dirt or moisture that may lead to false activating with smoke detectors.

Siemens FDF221-9 is a DA infrared flame detector used for simple applications, additional to smoke detectors. Only used without source of interference such as sun, halogen light, and black body radiation.

Siemens FDOOTC241 is a multi-sensor fire detector used for very early and reliable detection of emerging fire, due to analysis of the three criteria smoke, heat and gas. Very fast response to all carbon monoxide (CO) generating fires and very early and reliable alarming in environments with deceptive phenomena. Works according to the scattered-light principle with two sensors, optical forward and backward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects both dark and light smoke particles.

Siemens HI720 is  aheat detector for use in areas where smoke detection is impractical due to high level of dust, dirt, steam and high humidity. Selectable parameter sets for rate of rise and fixed temperature.

Siemens System 3 is a fire alarm system that helps protect 70% of all commercial and institutional buildings in North America from the threat of fire. This conventional approach to fire protection satisfies the needs for most small and mid-size buildings by simply meeting fire code requirements.

Siemens DT1101A-Ex is a heat detector used for the monitoring of explosion-hazard areas of zones 1 and 2 with a maximum ambient temperature of 50 °C. It is characterised by reliable response behavior, not only in the event of slow temperature rises, but also where the temperature rises are fast.

Siemens OH320C is a smoke detector that has a completely new and patented optical system and the latest electronics. This opens up new dimensions with regard to safety and functionality.

Siemens FDF241-9 is a ASA infrared flame detector specially suited to environments where deceptive phenomena such as e.g. sun, radiation or hot engines have to be expected. It can be ued for large industrial warehouses, hangars for military and civil aircraft, underground tunnels etc.

Siemens XCM1002 is a main board used for a fire detection system.

Siemens FDOOT241-9M is a multi-sensor smoke detector with collective base used for early detection of flaming fires caused by the combustion of liquid and solid matter, as well as smoldering fires. It works according to the scattered-light principle with two sensors, optical forward and backward scattering.

Siemens DO1133A is a smoke detector with increased sensitivity for use in air sampling smoke detection systems. With the auto-addressable feature, no dip switch or punch card settings have to be made. It has a built-in isolator that enables the fire control panel to localise short circuits and open lines during commissioning.