Hochiki Europe Fire Detection

Model DCD-CE3M is a Marine Approved Rate of Rise Heat Detector with a 90°C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. The DCD-CE3M is ideal for use where medium ambient temperatures exist, such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen/galley. The DCD-CE3M is supported on the majority of conventional systems. A third terminal provides remote indicator output.

Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white

User selectable modes Incorporates Optical & Heat elements Removable, High Performance Chamber Twin LEDs allow 360° viewing – green when polling, turn red in fire Pulsing/non-pulsing controlled from panel* Variable sensitivity Electronically Addressed

Removable, High Performance chamber Twin LEDs allow 360° viewing – green when polling, turn red in fire  Locking mechanism (sensor to base) Variable sensitivity Electronically addressed Pulsing/non-pulsing controlled from panel

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Range of mounting bases Approved by LPCB & VdS Also available in white

Absolute smoke detection Wide sensitivity range Single pipe inlet Five (5) status LEDs Referencing VESDAnet communication (VN) Clean air barrier optics protection Three (3) Alarm Levels Three (3) Programmable Relays Air flow monitoring Optional remote display and relay capability Simple mounting design Auto Learn

Electronic linear heat detection Incorporates a 90C fixed temperature element Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Full range of mounting bases Approved by LPCB & VdS Also available in white

Suitable for Zone 2 applications Absolute smoke detection Wide sensitivity range Single pipe inlet Five (5) status LEDs Referencing VESDAnet communication (VN) Clean air barrier optics protection Three (3) Alarm Levels Three (3) Programmable Relays Air flow monitoring Optional remote display and relay capability Simple mounting design AutoLearn IP54 rated stainless steel enclosure

Model ALN-ENM(WHT) is a Marine Approved Photoelectric Smoke Sensor, which is fully compatible with Hochiki's ESP Analogue Addressable Protocol. The ALN-ENM(WHT) incorporates Hochiki's newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms. The ALN-ENM(WHT) smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.

Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white

User selectable modes Incorporates Optical & Heat elements Removable, High Performance Chamber Twin LEDs allow 360° viewing – green when polling, turn red in fire Pulsing/non-pulsing controlled from panel* Variable sensitivity Electronically Addressed

Up to 2,000 sqm (20,000 sq ft) coverage Up to 4 inlet pipes Total pipe length up to 360m (1200 ft) Five (5) high intensity status LEDs for greater visibility Robust absolute smoke detection Patented Intelligent Filter Five (5) relays (Fire, Fault and 3 configurable) Relays configurable as latching or non-latching IP66 Enclosure

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white

Low current consumption Easy to install Maximum 93 dB(A) @ 1 metre (Tone 1) 32 user-selectable tones and 3 user-selectable volumes Utilises high intensity LEDs Lockable cap available

Electronics free mounting base Remote indicator output ATEX Classification to II 1G EEx ia IIC T5 Tamb=55C Suitable for installation in areas at Category 1 (inc all lower categories) Also available in white Approved by LPCB and GL SIL2 Approved variant available

Out-of-the-Box Installation and Commissioning Ultrasonic Airflow Sensing Laser-Based Absolute Smoke Detection Pre-engineered pipe network designs Programmable Alarm Thresholds Clean air barrier optics protection Instant Recognition Display Instant Fault Finder AutoLearn Smoke AutoLearn Flow Field Service Access Door Multiple Event Logging in separate logs - up to 18000 events Offline/online configuration capability Up to 250 sqm (2500 sq ft) coverage

Wide sensitivity range Laser based smoke detection 4 configurable alarm levels High efficiency aspirator Four inlet pipes Airflow supervisor per sampling pipe Clean air barrier optics protection Easy to replace air filter 7 programmable relays Event log Modular design Recessed mounting option

Class 1 performance as defined in BS EN54-10:2002 (range up to 25 m) Single IR technology Robust and slim design Low current consumption Easy to install Fits the CDX marine-approved standard base Twin LEDs for 360 degree view Approved by LPCB & VdS Approved to MED by GL

Electronic linear heat detection Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Fixed Temperature Detector Full range of mounting bases Approved by LPCB & VdS Also available in white

Suitable for Zone 2 applications Absolute smoke detection Wide sensitivity range Single pipe inlet Five (5) status LEDs Referencing VESDAnet communication (VN) Clean air barrier optics protection Three (3) Alarm Levels Three (3) Programmable Relays Air flow monitoring Optional remote display and relay capability Simple mounting design AutoLearn IP54 rated stainless steel enclosure

Out-of-the-Box Installation and Commissioning Ultrasonic Airflow Sensing Laser-Based Absolute Smoke Detection Pre-engineered pipe network designs Programmable Alarm Thresholds Clean air barrier optics protection Instant Recognition Display Instant Fault Finder AutoLearn Smoke AutoLearn Flow Field Service Access Door Multiple Event Logging in separate logs - up to 18000 events Offline/online configuration capability Up to 500 sqm (5000 sq ft) coverage

Unaffected by convection currents, draughts or wind and solar-blind Tolerant of fumes, vapours, dust and mist Responsive to a flame more than 25 m away Selectable response speed Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting) Optical self-test

Ultra small, low cost aspirating smoke detector for easy and discreet installation High sensitivity provided by laser based forward light scatter for reliable early warning Two sampling pipes up to 100 m (aggregate) in length (still air) False alarms reduced by unique laser sensing technology - able to discriminate against dust RS485 communications built in as standard for networking and remote communications

Tolerant of fumes, vapours, dust and mist ATEX certification to: EEx ia IIC T4 (135 C) (zones 0, 1 and 2) Responsive to a flame more than 25 m away Selectable response speed Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting) Optical self-test Approved by LPCB SIL capable

Absolute smoke detection Wide sensitivity range Single pipe inlet Five (5) status LEDs Referencing VESDAnet communication (VN) Clean air barrier optics protection Three (3) Alarm Levels Three (3) Programmable Relays Air flow monitoring Optional remote display and relay capability Simple mounting design Auto Learn

User selectable modes Incorporates Optical & Heat elements Removable, High Performance Chamber Twin LEDs allow 360° viewing – green when polling, turn red in fire Pulsing/non-pulsing controlled from panel* Variable sensitivity Electronically Addressed

Electronic linear heat detection Incorporates a 90C fixed temperature element Remote Indicator output Wide voltage range (9.5 ~ 30 V dc) Twin fire LEDs allow 360 viewing Full range of mounting bases Approved by LPCB & VdS Also available in white

Wide sensitivity range Laser based smoke detection 4 configurable alarm levels High efficiency aspirator Four inlet pipes Airflow supervisor per sampling pipe Clean air barrier optics protection Easy to replace air filter 7 programmable relays Event log Modular design Recessed mounting option