Zeta Fire Detection

Two loop analogue addressable fire alarm panel, designed to be as simple to use as a conventional fire alarm panel. Two addressable loops (divided into 16 zones) and 4 conventional sounder circuits. Supports a serial repeater, includes a real time clock and has 2,048 capacity event log. Loop capacity: 126 devices. Flame retardant ABS plastic. Set of changeover relay contacts for fault condition. One man test mode. Plug & play, no need for any special tools or laptop. Fully integrated qwerty keypad. All associated devices are loop powered. System voltage: 24 V DC.

Analogue addressable rate of heat rise heat detector. Also responds to a fixed temperature of 57°C. Works with the Zeta Addressable Protocol and is compatible with all current Zeta analogue addressable control panels. Detector class: rate of rise and fixed heat. Minimum continuous temperature: 0°C. Coverage: 50 m2. Start up time: 30 seconds. Comes supplied with a locking grub screw to prevent unauthorised head removal. Complies fully to EN54 parts 5 & 7. IP43 protection rating.

Carbon monoxide detector. Can be used either in a stand-alone mode or connected to Zeta Alarm Systems MGC 126 Multiple Gas Controller addressable panel. Colour coded for ease of identification. Provides three alarm levels (indicated by relay outputs) and a 12 V alarm output. Programmable alarm levels with 12 V configurable alarm output. Fault relay for detector malfunction. Range: 0-1000 ppm. Sensor type: Electrochemical. Sensor life: 3 years. Operating temperature 0 - 50°C. Size: 130 x 170 x 70.

Analogue fixed temperature linear heat detection system. Provides the distance of the "hot-spot" from the controller. Cable identification colour: red. Alarm setting: 68 to 158°C. Alarm indication: distance from controller. Cable: High temp PVC. Supply voltage: 24 V DC. Opearting temperature: -20 °C to 100°C. Enclosure size:138 x 200 x 100 mm. Weight: 2.5 kg.

n-heptane gas detector. Can be used either in a stand-alone mode or connected to Zeta Alarm Systems MGC 126 Multiple Gas Controller addressable panel. LEL (%): 1.05. Range: 0-100% LEL. Alarm levels: 10-50% LEL. Electrochemical sensor. Colour coded for ease of identification. Three programmable alarm levels (indicated by relay outputs) and a 24 V alarm output. Sensor life: 5 years. Operating temperature: 0 - 50°C. Size: 130 x 170 x 70.

The Premier MX range of fire alarm panels are approved by LPCB to EN54 parts 2 & 4. Panels have an extensive range of configuration options, but are easy to install and configure. Programming options: Latching or non-latching zones, delayed or non delayed zone operation, standard or intrinsically safe zone mode, short circuit to fire mode for compatibility with old detectors, zonal or common alarm operation, latching or non-latching fault modes, fault routing, etc. Sounder output: 4 x 1.0 A @ 24 V DC. System voltage: 24 V DC.  Enclosure dimensions: 325 x 340 x 126 mm.

Fire alarm panel with two "crossed zones" for co-incidence detection for the extinguishing circuit, and four conventional zones for standard fire alarm detection for the rest of the installation (non protected area). Large variety of inputs and outputs; can connect to a wide variety of equipment. Built in manual release call point with two-stage operation to initiate the gas release. Designed to BS EN 12094-1:2003 & EN54 parts 2 & 4 standards. System voltage: 24 V DC. Operating temperature: -0°C to 50°C. Enclosure size: 485 x 395 x 130 mm. Weight: 8 kg.

Fire alarm panel ideal for small to medium sized installations. Detection zones: 6. Fault relay. Current limited charger to prevent flat batteries drawing too much current. Built in diode base compatibility. Sounder delay facility. Connection to optional add on zonal output card. Zone disablement facility. One-man test facility. The zonal output card gives a drive voltage to operate zonal alarm relays, or a hardwired repeater panel. They meet all the requirements of EN54 parts 2 & 4. Attractively styled enclosures.

Fire alarm panel for small to medium sized installations. Fault relay. Current limited charger to prevent flat batteries drawing too much current. Built in diode base compatibility. Sounder delay facility. Connection to optional add on zonal output card. Zone disablement facility. One man test facility. The zonal output card gives a drive voltage to operate zonal alarm relays, or a hardwired repeater panel. Detection zones: four. Meet all the requirements of EN54 parts 2 and 4. Attractively styled enclosure.  

Used either in a stand-alone mode or connected to Zeta Alarm Systems MGC 126 Multiple Gas Controller addressable panel. Carbon monoxide (CO) is detected by the electrochemical sensor fitted in the lower housing of the device. The GAS Sense series of detectors are colour coded for ease of identification - a yellow border for the LCD display indicating CO. The detector provides three alarm levels (indicated by relay outputs) and a 12 V alarm output. The three alarm levels can be programmed by the user (the default alarm thresholds are indicated below).The 12 V alarm output can be configured to operate for any of the three alarm thresholds. Alarm LEDs 1 to 3 operate in conjunction with relays 1 to 3, respectively. A fault relay is provided to indicate a detector malfunction.   

Easy to install, programme and operate 1 loop analogue fire alarm panel. Network up to 15 panels giving a total of 60 loops. Programmable zones: 32. Panel allows up to 126 addresses per loop. Windows based, full upload/download PC software package. Steel enclosures finished in hardwearing epoxy paint. Suited to installations which require very complex sounder and control/shutdown functions. 4 line x 20 character backlit LCD display. Keyswitch-enabled membrane controls. Complies with EMC and LVD directives. System voltage: 28 V DC. Weight: 15 kg (including batteries).

Optical smoke detector, particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10 μm). Works with the Zeta Addressable Protocol and is compatible with all current Zeta analogue addressable control panels. Detector class: Optical smoke. Nominal alarm level: 2.4% obscuration per metre. Coverage: 100m2. Start up time: 10 seconds. Twin LEDs to improve alarm indication. Supplied with a locking grub screw to prevent unauthorised head removal. DIFT approved. Complies fully to EN54 parts 5 & 7.

The Fyreye addressable reflective beam smoke detector comprises a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. Should a predetermined level be reached, the detector will signal an alarm. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below the ceiling and parallel to it. Lateral detection may be up to 7.5 metres either side of the beam. Typical Applications: Beam detectors are generally used for two purposes: either to cover a wide-open space and/or in places where several regular smoke detectors would be aesthetically unacceptable. Such places include: Shopping centres Heritage sites Churches or mosques Museums Leisure centres Open Plan offices Warehouses Factories Power stations and more. Features 50 or 100 metre addressable reflective beam smoke detector Vds approved Complies fully to; BS 5839 part 5, EN54 part 12 Single compact housing Horizontal or vertical mounting 12-24 V DC operation Low current consumption Latching or non latching alarm Reflector targeting mode to ease set-up Microprocessor controlled Automatic contamination compensation Selectable sensitivity Robust construction