Eltek Fire & Safety Fire Detection

Eltek Fire & Safety 251,604.07 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire.

Eltek Fire & Safety 251,604.06 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire. This differential detector provides alarm at an abnormally fast or slow temperature rise when it reaches maximum value.

Eltek Fire & Safety 251,604.03 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire. This differential detector provides alarm at an abnormally fast or slow temperature rise when it reaches maximum value.

Eltek Fire & Safety 251,604.02 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire. This differential detector provides alarm at an abnormally fast or slow temperature rise when it reaches maximum value.

Eltek Fire & Safety 251,604.05 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire.

Eltek Fire & Safety ECO1004T A heat detector has a fixed alarm limit at 58 and 78 degree celcius. The detectors' fixed alarm limit is intended for areas where rapid changes in temperature can be expected.

Eltek Fire & Safety 251,529.02 is a heat detector for wet areas which is used on conventional loops and addressable loops via transponder.

Eltek Fire & Safety S-4000 is an optical smoke detector to which can be wireless connected to upto 24 devices, signalling alert to every device. The detector features the optical detection principle which is well suited for the earliest possible detection of the normally occurring fires in homes. The S-4000 detector is equipped with test function and LED lamps that signals every minute to indicate normal function.

Eltek Fire & Safety Ei146 is a smoke detector powered by 230V AC directly from the mains, and also has a 9V alkaline battery backup in case of power failure. The detector's backup battery can drive smoke alarm for up to two years by a mains failure. The detector also functions as an effective optical chamber with insect net reduction of false alarms, and the possibility of connecting up to 12 devices so that an alarm on one of the devices will alert the others in the chain. Ei146 has a built-in circuit that suppresses peaks in supply voltage and RF interference so it is further protected against false alarms caused by external influences.

Eltek Fire & Safety 251,529.01 is a heat detector for wet areas which is used on conventional loops and addressable loops via transponder.

Eltek Fire & Safety ECO1005 A heat detector has a fixed alarm limit at 58 and 78 degree celcius. The detectors' fixed alarm limit is intended for areas where rapid changes in temperature can be expected.

Eltek Fire & Safety 251,604.08 optical smoke detector uses the photoelectric light scattering as detection principle. The optical chamber provides good immunity to nuisance alarms, while it is resistant to ingress of dust and other pollutants in the air.

Eltek Fire & Safety 251,604.04 is a heat detector with two thermistors that continuously records the temperature. One is isolated in the detector housing, while the other sits open and quickly registers a higher temperature by fire. This differential detector provides alarm at an abnormally fast or slow temperature rise when it reaches maximum value.

Eltek Fire & Safety 251529 is a heat detector for wet areas which is used on conventional loops and addressable loops via transponder.

Eltek Fire & Safety ECO1003 A smoke detector has an optical chamber. This reduces nuisance alarms caused by dust and increases the sensitivity of the detector. In addition, the detector will consider the signals from the chamber to ignore the rapid changes in the environment that does not comply with fire.

Eltek Fire & Safety 251,604.09 is a multi-sensor smoke detector with detection chamber and an additional thermal element. The combined sensor technology provides better immunity against unwanted alarms than detectors with only a single detection principle.

Eltek Fire & Safety 601F-M Ex flame detector is powered by address unit / transponder as other conventional detectors. The detector is designed for indoor use. 601FEx-M is an intrinsically safe version for use in hazardous areas.

Eltek Fire & Safety ECO1005T A heat detector has a fixed alarm limit at 58 and 78 degree celcius. The detectors' fixed alarm limit is intended for areas where rapid changes in temperature can be expected.

Eltek Fire & Safety 601F-M flame detector is powered by address unit / transponder as other conventional detectors. The detector is designed for indoor use. 601F-M is an advanced IR flame detector with an optical filter that makes it immune to sunlight and most occurring false alarm phenomena.