Edwards Signaling Fire Detection

Edwards Signaling 438D-8N5-R is an 8-inch diode polarised, vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is red epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.

Edwards 439 Series fire alarm bells are diode polarised, vibrating bells for use with fire alarm equipment. They operate in conjunction with an installed fire alarm panel and detection devices. The steel alloy gongs are epoxy powder finished and produce a loud, resonant tone required in fire alarm systems.

Edwards Signaling MPSR2-D45W-GE is a non coded fire alarm manual pull station. The weatherproof station is rated for outdoor use. It is available in double action activation with double pole (double throw) alarm contacts. The access to the unit for resetting purposes is gained with a keylock. It also features terminals for wire connections.

Edwards Signaling 439D-6RAU is a 6-inch diode polarised, red vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.

Edwards Signaling E-270 is a one stage manual fire alarm pull station. It offers contractors and installers simple setup and installation, while delivering options that take full advantage of intelligent fire alarm processing. With a microprocessor in each device, intelligence is distributed throughout the system so that command decisions are made instantly at the individual pull station. The E-270 pull station is a normally open dry contact initiating device that requires one action by the user to initiate an alarm.

Edwards Signaling 439D-10AW is a 10-inch gray vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is epoxy powder coated and produce a loud, resonant tone required in fire alarm systems.

Edwards Signaling SD-2W is a two-wire duct smoke detector that use differential sensing to prevent gradual environmental changes from triggering false alarms. A rapid change in environmental conditions, such as smoke from a fire, causes the detector to automatically signal an alarm condition but dust and debris accumulated over time does not change alarm sensitivity.

Edwards Signaling 278B-1120 is a non coded double action fire alarm station with terminals for field wiring connections. It is suitable for fire alarm installations in schools, hospitals, factories, and industrial locations. The station provides a break glass, initiating operation. It is available with single pole alarm normally open (N.O.) switch contacts.

Edwards Signaling 302-194 heat detector is designed for use in interior applications. The normally-open device is designed to close an electrical circuit upon activation. It features rate compensation and is available with 194 °F (90 °C) rating.

Edwards Signaling 439D-10AW-R is a 10-inch diode polarised, vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is red epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.

Edwards Signaling 517THB smoke detector with 9V battery backup is designed for multi-family, residential and institutional occupancies defined by NFPA 101, in compliance with UL 217 and NFPA 72. It provides a three position test feature that simulates actual smoke conditions. The temporal pattern evacuation tone is a standard feature. It is designed for ceiling or wall mounting on a standard electrical box and can tandem wire up to 12 units (or 6 with relay) to form a system.

Edwards Signaling 277B-1110 is a non coded single action fire alarm pull station with termnals for field wiring connections. It is suitable for fire alarm installations in schools, hospitals, factories, and industrial locations. The station provides a break glass, initiating operation. It is available with single pole alarm normally open (N.O.) switch contacts.

Edwards Signaling E-PDD intelligent duct detector provides early warning of an impending fire and shut down the HVAC unit in order to prevent smoke from circulating throughout the building. It features a unique design that speeds installation and simplifies maintenance. Removable dust filters, conformally coated circuit boards, and optional water-resistant gaskets keep contaminants away from components, ensuring years of trouble-free service. The duct smoke detector is designed for use in duct applications where temperatures can exceed standard detector capabilities.

Edwards Signaling 302-ET-194 is an all-weather box mount heat detector. It is hermetically sealed for moisture proof or dust proof installations. The normally-open device is designed to close an electrical circuit upon activation. It features rate compensation and is available with 194 °F (90 °C) rating.

Edwards Signaling E-PHD is an intelligent analogue optical/fixed temperature detector. It houses a replaceable optical sensing chamber that detects smoke, as well as a fixed-temperature sensor that detects heat. The detector analyses data from both sensors to determine when an alarm is initiated. It continuously adjust its sensitivity reference value to compensate for changes in the environment such as the presence of dirt, temperature, and humidity. The detector issues a dirty sensor warning when it reach its preset limit, reducing the chance of a nuisance alarm.

Edwards Signaling MPSR2-S45W-GE is a non coded fire alarm manual pull station. The weatherproof station is rated for outdoor use. It is available in double action activation with single pole (normally open) alarm contacts. The access to the unit for resetting purposes is gained with a keylock. It also features terminals for wire connections.

Edwards Signaling 439D-8AW-R is an 8-inch diode polarized, vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is red epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.

Edwards Signaling 517T smoke detector is designed for multi-family, residential and institutional occupancies defined by NFPA 101, in compliance with UL 217 and NFPA 72. It provides a three position test feature that simulates actual smoke conditions. The temporal pattern evacuation tone is a standard feature. It can be mounted on ceiling or wall and can tandem wire up to 12 units (or 6 with relay) to form a system.

Edwards Signaling 283B-PL heat detector offers fixed temperature detection. If the temperature of the center disk rises to the sensor’s rated temperature, the fixed temperature element activates. This closes contacts in the sensor and transmits an alarm condition to the fire alarm control panel. The fixed temperature element is non-restorable and, when activated, the detector must be replaced.

Edwards Signaling 302-EPM-194 is an explosion proof heat detector for installations in hazardous locations. The normally-open device is designed to close an electrical circuit upon activation. It features rate compensation and is available with 194 °F (90 °C) rating.

Edwards Signaling 323D-10AW is a 10-inch gray single stroke bell designed for fire alarm applications. The gong is made of selected alloy steel to give the loud, resonant tones necessary in fire alarm systems.

Edwards Signaling 276B-1120 is a non coded single action fire alarm pull station with termnals for field wiring connections. It is suitable for fire alarm installations in schools, hospitals, factories, and industrial locations. The station provides a break glass, initiating operation. It is available with single pole alarm normally open (N.O.) switch contacts.

Edwards Signaling 302-EPM-135 is an explosion proof heat detector for installations in hazardous locations. The normally-open device is designed to close an electrical circuit upon activation. It features rate compensation and is available with 135 °F (57.2 °C) rating.

Edwards Signaling 701U is a two-wire self-diagnostic smoke detector base.

Edwards Signaling 517TH smoke detector is designed for multi-family, residential and institutional occupancies defined by NFPA 101, in compliance with UL 217 and NFPA 72. It provides a three position test feature that simulates actual smoke conditions. The temporal pattern evacuation tone is a standard feature.

Edwards Signaling 270-SPO is a single pole pull station for fire alarm installations in schools, hospitals, factories, and industrial locations. The station provides a single action, break glass, initiating operation. It is available with normally open (N.O.) switch contacts. The non-coded fire alarm station has screw terminals for field connection.

Edwards Signaling 438D-10N5 is a 10-inch diode polarised, gray vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.

Edwards Signaling 439D-10RAU is a 10-inch diode polarised, red vibrating bell for use with fire alarm equipment. It operates in conjunction with an installed fire alarm panel and detection devices. The steel alloy gong is epoxy powder coated and produces a loud, resonant tone required in fire alarm systems.