Cervinka Flammable Material Control

It is mainly used in workplaces with fine mechanics, electrical equipment or flammable liquids. It is not appropriate to use for extinguishing of bulk solids and combustible dusts. The big advantage is that filling after use is evaporated. It can be used for extinguishing electrical equipment under voltage up to 1000 V, from minimum distance of 1 m. This is a pressurized gas containers. After use, extinguisher is refillable.  

Protecta® FR Graphite is a water based fire classified sealing compound that contains a high concentration of heat expanding graphite material. This compound may be used in more extreme transits than FR Acrylic, for example cable trays to EI 180 and plastic pipes Ø110mm. Protecta FR Graphite expands when it is subjected to fire and closes openings around penetrations when any combustible or low temperature melting materials have burnt away. Protecta® FR Graphite is designed to fire seal difficult services which traditional fire rated mastics do not achieve such as large plastic pipes. Main uses The intended use of Protecta® FR Graphite is to reinstate the fire resistance performance of flexible and rigid wall, and floor constructions where they are penetrated by various steel and plastic pipes, cables with and without cable trays. Features Classifi ed in most constructions for plastic pipes and cables Easy to apply High sound insulation Low emissions - environmentally and user friendly Permanently flexible – will accommodate movement up to 12.5% No priming necessary for application to most materials; see the installation instructions for further details Suitable for most surfaces, included concrete, bricks, Leca, steel, wood, gypsum, glass, PVC and most non-porous surfaces. Hardens quickly, tack free after 1 hour The fire performance specification of the joint filler has been derived when the joint filler has been allowed to cure for 30 days Minimum 12 months’ storage time 30 years working life Sound rating: Rw 53 dB - Single sided seal ≥ 25mm depth. Rw > 53 dB - Double sided seal ≥ 25mm depth. Fire rating: Up to 4 hours depending on application Packaging variants P010 / Cartridge 310 ml

Protecta® FR Pipe Wrap is a graphite material within flexible plastic sleeve, which reacts to heat expanding through the penetration and to the melting plastic pipes, which causes the wrap to foam up and fill the free space created. It can be used with plastic pipes (PVC-C, PVC-U, PP, PE, PE-HD, ABS and SAN+PVC), bundles of plastic pipes – with or without cables, and metal pipes with penetrating combustible insulation. Fitted by wrapping around the through-penetration and securing with the adhesive tape, then placing it into the wall or floor construction together with either Protecta® FR Board or Protecta® EX Mortar. Main uses The intended use of Protecta® FR Pipe Wrap is to reinstate fire resistance performance of flexible wall constructions, ridged wall construction and ridged floor construction where they are penetrated by various metal pipe services. They can be used with and without combustible insulation and plastic pipes when used in combination with Protecta® EX mortar and Protecta® FR Board. Features For plastic pipe sizes from smallest pipes available to Ø 400 mm with a wide range of pipe wall thicknesses For metal pipes with continuous combustible pipe insulation For plastic pipes with cables (conduits) Pipe wrap comes in two different types - ready made for most common diameters and in 25 metre rolls for all diameters Fire classification up to 240 minutes for both integrity and insulation Certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP pipes Tested and certified for U/U pipe end applications Classified for fire sealing in all construction types Excellent sound insulation No emissions - environmentally and user friendly Simple to install in both Protecta® FR Board and EX Mortar Unlimited storage time (under correct conditions) 30 years working life guarantee Sound Rating: 55 dB RW - Pipe Wraps installed in FR Board 64 dB RW - Pipe Wraps installed in EX Mortar Fire rating: Up to 4 hours depending on application Packaging variants P276 / Winding (w x l): 50 mm x 25 m P099 / Winding (w x l): 50 mm x 25 m - Selb-adhesive P106 / Winding (w x l): 75 mm x 25 m

Protecta® Service Coating FR-1 is a water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation. The coating is non-toxic, emission free, durable and can be applied in one coat saving time and money.   Main uses Protecta® Service Coating FR-1 provides excellent fire resistance, making combustible cables fire-proof. It can be used in combination with Protecta® FR Board as a coatback on services to achieve a higher fire classification.   Features Non-toxic and emission-free with near zero VOC and best possible emission classifications Durable, robust and designed to last, can be cleaned with a damp cloth without the risk of washing off the paint No topcoat needed, excellent coverage by brush or spray and can be applied in one-coat saving paint and especially application time The durability of the coating is expected to be at least 12 years Halogen-free with added preservatives that resist bacteria and fungal growth providing extra health protection in addition to the non-harmful emissions   Fire rating: Up to 90 minutes depending on application   Test report of this product is to be found HERE. Installation Instructions and Technical Data Sheet are to be found HERE.

DimiLex® AFFF is highly effective synthetic aqueous film forming foam concentrate based on surface active agents. A combination of surfactants, foam stabilizers and antifreeze compounds fighting non-polar hydrocarbon fires. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. The film forms a stable blanket that suppresses the release of flammable vapours and cools down the fuel surface, extinguishing the fire and preventing reignition. The low surface tension of the water-foam solution enables the aqueous film to float on top of the liquid surface. Certified according to EN 1568.  DimiLex® AFFF is mostly used by Military industry, Fire Brigades, Oil and Gas refineries. DimiLex®AFFF is used in all foam equipment and installations for fighting fires of class A + B. Non-aspirating equipment may be used for hydrocarbon fires where the aqueous film is active even without expanded foam. DimiLex® AFFF is especially suited whenever rapid fire knockdown is essential. It is ideal for any area where flammable non water miscible fuels are stored, handled or consumed. It is compatible with dry chemical powders class A, B, C and D and can be used in powder/foam twin agent systems.   Concentration: 3% Density at 20°C: 1.015 +/- 0,01 g/ml рН: 6.5 ÷ 8.5 Viscosity at 20°С: < 10 mm2 /s Freezing point: From -2°С to -25°С Melting point: From -1°С to -24°С Suspended sediment (v/v): < 0,2% Storage temperature: -25°C up to + 50°С Expansion: > 7 25 % drainage time: > 2.30 min.

DimiLex® AFFF is highly effective synthetic aqueous film forming foam concentrate based on surface active agents. A combination of surfactants, foam stabilizers and antifreeze compounds fighting non-polar hydrocarbon fires. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. The film forms a stable blanket that suppresses the release of flammable vapours and cools down the fuel surface, extinguishing the fire and preventing reignition. The low surface tension of the water-foam solution enables the aqueous film to float on top of the liquid surface. Certified according to EN 1568.  DimiLex® AFFF is mostly used by Military industry, Fire Brigades, Oil and Gas refineries. DimiLex®AFFF is used in all foam equipment and installations for fighting fires of class A + B. Non-aspirating equipment may be used for hydrocarbon fires where the aqueous film is active even without expanded foam. DimiLex® AFFF is especially suited whenever rapid fire knockdown is essential. It is ideal for any area where flammable non water miscible fuels are stored, handled or consumed. It is compatible with dry chemical powders class A, B, C and D and can be used in powder/foam twin agent systems. Concentration: 6% Density at 20°C: 1.012 +/- 0,01 g/ml рН: 6.5 ÷ 8.5 Viscosity at 20°С: < 10 mm2 /s Freezing point: From -2°С to -25°С Melting point: From -1°С to -24°С Suspended sediment (v/v): < 0,2% Storage temperature: -25°C up to + 50°С Expansion: > 7 25 % drainage time: > 2.30 min.

It is mainly used in workplaces with fine mechanics, electrical equipment or flammable liquids. It is not appropriate to use for extinguishing of bulk solids and combustible dusts. The big advantage is that filling after use is evaporated. It can be used for extinguishing electrical equipment under voltage up to 1000 V, from minimum distance of 1 m. This is a pressurized gas containers. After use, extinguisher is refillable.

DimiLex® AFFF is highly effective synthetic aqueous film forming foam concentrate based on surface active agents. A combination of surfactants, foam stabilizers and antifreeze compounds fighting non-polar hydrocarbon fires. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. The film forms a stable blanket that suppresses the release of flammable vapours and cools down the fuel surface, extinguishing the fire and preventing reignition. The low surface tension of the water-foam solution enables the aqueous film to float on top of the liquid surface. Certified according to EN 1568.  DimiLex® AFFF is mostly used by Military industry, Fire Brigades, Oil and Gas refineries. DimiLex®AFFF is used in all foam equipment and installations for fighting fires of class A + B. Non-aspirating equipment may be used for hydrocarbon fires where the aqueous film is active even without expanded foam. DimiLex® AFFF is especially suited whenever rapid fire knockdown is essential. It is ideal for any area where flammable non water miscible fuels are stored, handled or consumed. It is compatible with dry chemical powders class A, B, C and D and can be used in powder/foam twin agent systems.   Concentration: 1% Density at 20°C: 1.045 +/- 0,02 g/ml рН: 6.5 ÷ 8.5 Viscosity at 20°С: < 20 mm2 /s Freezing point: From -2°С to -25°С Melting point: From -1°С to -24°С Suspended sediment (v/v): < 0,2% Storage temperature: -25°C up to + 50°С Expansion: > 15 25 % drainage time: > 5 min.

KARATE AFFF 6% F is specially formulated for extinguishing and securing flammable hydrocarbon liquid fires. It is based on foaming agents and stabilizers. The combination with low concentrated short chain fluorocarbon surface active agents, which comply of course with the EU directive 2006/122/EG, produces a vapour-surpressing aqueous film that spreads rapidly over hydrocarbon surfaces to provide rapid control and extinguishment. The unique combination of active ingredients ensures fast flame knockdown and extinguishment, long burn-back resistance and high level of security by re-sealing the foam blanket when ruptured by personnel or eguipment. KARATE AFFF 6% F is perfectly balanced between performance and efficiency even when used with soft or hard, fresh, brackish, sea or treated industrial water. KARATE AFFF 6% F in intended for use at a proportioning rate of 6% (6 parts concentrate to 94 parts water) on hydrocarbon fuels such as gasoline, kerosene, diesel, etc. It can be applied with conventional discharge devices as low and medium expansion foam. It complies with the requirements of the standard DIN EN 1568 Part 1 and 3 (2008) as fire extinguishing foam concetrate to generate low and medium expansion foam for combatting fires of classes A and B according to DIN EN 2. It is non-toxic. Technical data: Density at 20°C: 1.04 - 1.08kg/l Freezing point: < -15°C  pH Value at 20°C: 6.0 - 9.5 Kin. Viscosity at 20°C: < 3 mm²/s                        at 0°C: < 10 mm²/s                     at -15°C: < 20 mm²/s Sediments: none    

KARATE MB 5 is superior quality multipurpose fire-fighting foam concentrates for extinguishing and securing flammable hydrocarbon liquid fires even at low ambient temperatures, as low as -15°C and -5°C respectively. Unique formulations are a biodegradable blend of high surface-active foaming agents, foam stabilizers and anti-freezing compounds for use at low, medium and high expansion. It is non-toxic and physiologically harm-less and readily biodegradable. KARATE MB 5 is intended for use at proportioning rates of 0.1% to 3% depending on the purpose of use. It can be applied with conven-tional air aspirating discharge devices as low, medium and high expansion foam or with non-aspirating devices as wetting agent. The foam generated is heat-resistant and stable against combustion gases resulting in a safe and effective fire extin-guishment combined with resistance against re-ignition in fire areas already extin-guished. KARATE MB 5 is perfectly suitable for temporarily sealing of toxic and / or highly flammable liquids and suppression of explosive gas and vapour releases after chemical spillage. Due to balanced formulation the multipurpose foam concentrates can be used with either soft or hard, fresh, brackish, sea or treated industrial water without any deterioration in their excellent performance and effectiveness. Therefore KARATE MB 5 is ideal suited also for the use on ships and in sea-ports. KARATE MB 5 is type approved in accordance with the requirements of the standards DIN EN 1568 Part 1, 2, 3 and 4 (2008) under the certification numbers SP 177/12 and SP 176/12 respectively as fire extinguishing foam concentrates to generate low, medium and high expansion foam for fire ex-tinguishing purposes for the fire classes A and B according DIN EN 2. At a recommended 3% proportioning rate extinguishing performances and burn-back resistances with potable and sea water are for both types of foam concen-trates identically tested and approved: Medium Expansion Foam (EN 1568-1): requirements fully fulfilled High Expansion Foam (EN 1568-2): requirements fully fulfilled Low Expansion Foam (EN 1568-3): III C (heptane) Technical data: Density at 20°C: 1.03 ± 0.02 kg/l Freezing point: -5°C pH-Value at 20°C: 6.5 to 8 Kin. Visconsity at 20°C: < 5 mm²/s                           at 0°C: < 10 mm²/s                          at -5°C: < 15 mm²/s Sediments (before and after aging): none

KARATE MB 15 is superior quality multipurpose fire-fighting foam concentrates for extinguishing and securing flammable hydrocarbon liquid fires even at low ambient temperatures, as low as -15°C and -5°C respectively. Unique formulations are a biodegradable blend of high surface-active foaming agents, foam stabilizers and anti-freezing compounds for use at low, medium and high expansion. It is non-toxic and physiologically harm-less and readily biodegradable. KARATE MB 15 is intended for use at proportioning rates of 0.1% to 3% depending on the purpose of use. It can be applied with conven-tional air aspirating discharge devices as low, medium and high expansion foam or with non-aspirating devices as wetting agent. The foam generated is heat-resistant and stable against combustion gases resulting in a safe and effective fire extin-guishment combined with resistance against re-ignition in fire areas already extin-guished. KARATE MB 15 is perfectly suitable for temporarily sealing of toxic and / or highly flammable liquids and suppression of explosive gas and vapour releases after chemical spillage. Due to balanced formulation the multipurpose foam concentrates can be used with either soft or hard, fresh, brackish, sea or treated industrial water without any deterioration in their excellent performance and effectiveness. Therefore KARATE MB 15 is ideal suited also for the use on ships and in sea-ports. KARATE MB 15 is type approved in accordance with the requirements of the standards DIN EN 1568 Part 1, 2, 3 and 4 (2008) under the certification numbers SP 177/12 and SP 176/12 respectively as fire extinguishing foam concentrates to generate low, medium and high expansion foam for fire ex-tinguishing purposes for the fire classes A and B according DIN EN 2. At a recommended 3% proportioning rate extinguishing performances and burn-back resistances with potable and sea water are for both types of foam concen-trates identically tested and approved: Medium Expansion Foam (EN 1568-1): requirements fully fulfilled High Expansion Foam (EN 1568-2): requirements fully fulfilled Low Expansion Foam (EN 1568-3): III C (heptane) Technical data: Density at 20°C: 1.04 ± 0.02 kg/l Freezing point: -15°C pH-Value at 20°C: 6.5 to 8 Kin. Visconsity at 20°C: < 10 mm²/s                           at 0°C: < 15 mm²/s                          at -5°C: < 20 mm²/s                        at -15°C: < 30 mm²/s Sediments (before and after aging): none

Fire protection ball is the simples the most effective automatic firefighting equipment, which can reduce the risk of fire as well resulting fire effectively resist at the same time. It is intended as the primary means of extinguishing the fire when ignited solid flammable substances (class A), liquid flammable substances (class B), flammable gases (class C), electrical equipment under voltage up to 5000 V (class E). Device combines the features of manual fire extinguishers and automatic systems. The case is made of safety foam plastic and outer siede is covered by a fuse which when ignited activates the weak explosives built into the upper part of the outer ball-shaped case. During the explosion of charge, the external case is fallen apart into small pieces and extingushing powder contained inside is dispersed and creates blocking cloud over the focus of fire. Consequently the fire is destroyed in few seconds, without human intervention. Activation is totally safe for environment. In case of the fire, when in contact with open fire the device is come self-activation and also produces a loud sound - fire alarm. One device protects the space 35 m3. During the dispersion of extinguishing agent is guaranteed full safety of person, property and the environment. The equipment shown high effectiveness in disposal focus of fire ignition in living rooms, industrial buildings, during ingnitation of electrical equipment under high voltage, for building and military facilities in trucks and cars, garden cottages or shipping. Package contains 1 pc (automatic extinguishing mean) holder screws with wall plugs instruction for use Advantages easy to use - just throw it into the fire active safety - permanent surveillance immediate warning - alerts the fire safer firefighting, used from a safe distance from fire for everyone - childern and seniors manage manipulation without risk to health - not damage health, the environment or slaked objects no additional cost, usability guaranteed 5 years