Task force tips AL26T1P0 LDH WYE 5.0"NHF LH X (2)4.0"STORZ NO/PRV
Technical Specification
- Make: Task Force Tips
- Model code: AL26T1P0
- Thread Type: Storz
- Type: Wye
- Action: Quarter Turn
LDH WYE 5.0"NHF LH X (2)4.0"STORZ NO/PRV Task Force Tips model #AL26T1P0 manually operated lightweight aluminum gated wye valve shall be provided. The two valves shall be controlled with NFPA compliant slow-close crank handle gear operators. Position indicators shall be provided to allow for quick visualization of the status of the valves in the open, closed or partial positions. For maximum corrosion protection the aluminum casting shall be hardcoat anodized, with a powder coat internal and external finish and the valve balls shall be constructed from hardcoat anodized aluminum alloy. A 3/4" bleeder/drain valve shall be installed. The connections shall be: 5" NH female swivel long handle inlet that will not swivel when tightened, and two (2) 4” Storz rigid outlets and include polymer bearing strips for prevention of galvanic corrosion. The unit shall have a unique serial number and be covered by a five-year warranty. Coupling Size Side A - 5" (125 mm) Coupling Size Side B - 4" (100mm) Coupling Swivel Side A - Non-Full Time Swivel Coupling Swivel Side B - Storz Rigid Handle Type - Quarter Turn L D H Inlet - Yes L D H Outlet - Yes Pressure Relief Valve - No Type - Wyes Weight - 33.1
Read moreMake | Task Force Tips |
---|---|
Manufacturer | Task Force Tips Inc. |
Category | Fire Protection>Valves |
Model code | AL26T1P0 |
Thread Type | Storz |
Type | Wye |
Action | Quarter Turn |
Additional info |
LDH WYE 5.0"NHF LH X (2)4.0"STORZ NO/PRV Task Force Tips model #AL26T1P0 manually operated lightweight aluminum gated wye valve shall be provided. The two valves shall be controlled with NFPA compliant slow-close crank handle gear operators. Position indicators shall be provided to allow for quick visualization of the status of the valves in the open, closed or partial positions. For maximum corrosion protection the aluminum casting shall be hardcoat anodized, with a powder coat internal and external finish and the valve balls shall be constructed from hardcoat anodized aluminum alloy. A 3/4" bleeder/drain valve shall be installed. The connections shall be: 5" NH female swivel long handle inlet that will not swivel when tightened, and two (2) 4” Storz rigid outlets and include polymer bearing strips for prevention of galvanic corrosion. The unit shall have a unique serial number and be covered by a five-year warranty.
|
Download PDF version Download PDF version |