VIKING Fire Protection

A modular control unit within the Oxeo multi-zone system to ensure the correct amount of extinguishant is deployed to the correct extinguishing zone 3 zones to be protected with 4 extinguishing quantities With main/reserve changeover device The control unit is intended for the use in IG-01 and IG-100 fire extinguishing systems Controls all pneumatic system components via control gas from a pilot cylinder

Adding a oscillating unit to a monitor, allows automatic coverage of a fixed area (from 15º to 360º) in a fire condition This can be beneficial when human (manual) control is not possible or is undesirable due to safety concerns or accessibility Manual operation by trained personnel is also possible The oscillating unit’s movement is driven by a small amount of redirected water/foam solution travelling through the monitor A water turbine shield is included as standard to direct this water/foam solution downwards A test feature is included to enable a test of the oscillation function and range without discharging from the monitor

A modular control unit within the Oxeo multi-zone system to ensure the correct amount of extinguishant is deployed to the correct extinguishing zone 3 zones to be protected with 3 extinguishing quantities With main/reserve changeover device The control unit is intended for the use in IG-01 and IG-100 fire extinguishing systems Controls all pneumatic system components via control gas from a pilot cylinder

A modular control unit within the Oxeo multi-zone system to ensure the correct amount of extinguishant is deployed to the correct extinguishing zone 4 zones to be protected with 3 extinguishing quantities With main/reserve changeover device The control unit is intended for the use in IG-01 and IG-100 fire extinguishing systems Controls all pneumatic system components via control gas from a pilot cylinder

Adding a oscillating unit to a monitor, allows automatic coverage of a fixed area (from 15º to 360º) in a fire condition This can be beneficial when human (manual) control is not possible or is undesirable due to safety concerns or accessibility Manual operation by trained personnel is also possible The oscillating unit’s movement is driven by a small amount of redirected water/foam solution travelling through the monitor A water turbine shield is included as standard to direct this water/foam solution downwards A test feature is included to enable a test of the oscillation function and range without discharging from the monitor

Adding a oscillating unit to a monitor, allows automatic coverage of a fixed area (from 15º to 360º) in a fire condition This can be beneficial when human (manual) control is not possible or is undesirable due to safety concerns or accessibility Manual operation by trained personnel is also possible The oscillating unit’s movement is driven by a small amount of redirected water/foam solution travelling through the monitor A water turbine shield is included as standard to direct this water/foam solution downwards A test feature is included to enable a test of the oscillation function and range without discharging from the monitor

A carbon steel pressure vessel containing an elastomeric bladder between the water and foam concentrate The bladder permits water pressure to be transferred to the foam concentrate without the two fluids mixing together 175 PSI /12.1 bar (1.2 MPa) design pressure rating FM Approved and/or UL Listed as part of a fire extinguishing system combining designated foam concentrates, specific proportioning equipment, and discharge devices

A carbon steel pressure vessel containing an elastomeric bladder between the water and foam concentrate The bladder permits water pressure to be transferred to the foam concentrate without the two fluids mixing together 175 PSI /12.1 bar (1.2 MPa) design pressure rating FM Approved and/or UL Listed as part of a fire extinguishing system combining designated foam concentrates, specific proportioning equipment, and discharge devices

A modular control unit within the Oxeo multi-zone system to ensure the correct amount of extinguishant is deployed to the correct extinguishing zone 4 zones to be protected with 5 extinguishing quantities With main/reserve changeover device The control unit is intended for the use in IG-01 and IG-100 fire extinguishing systems Controls all pneumatic system components via control gas from a pilot cylinder

Adding a oscillating unit to a monitor, allows automatic coverage of a fixed area (from 15º to 360º) in a fire condition This can be beneficial when human (manual) control is not possible or is undesirable due to safety concerns or accessibility Manual operation by trained personnel is also possible The oscillating unit’s movement is driven by a small amount of redirected water/foam solution travelling through the monitor A water turbine shield is included as standard to direct this water/foam solution downwards A test feature is included to enable a test of the oscillation function and range without discharging from the monitor

The VK660 is a Specific Application Attic Sprinkler designed to provide superior fire protection in combustible and non-combustible sloped attic spaces when compared to standard spray attic protection. With specific application criteria for use with Model V-BB (Back to Back), Model V-SD (Single Directional), and Attic Upright Specific Application Sprinklers, the Viking attic sprinklers provide an extended coverage spacing alternative to standard spray sprinklers. They make it possible to use a single line of piping at the attic peak, eliminating the need for branch lines and greatly reducing the number of required sprinklers and associated material and installation costs. Viking Attic Sprinklers can be installed with either steel or CPVC piping (CPVC allowed on wet pipe systems only), and are available in brass or with corrosionresistant Electroless Nickel PTFE (ENT) coatings where salt water and other  corrosive elements are a consideration. They are cULus Listed with specific application guidelines for use as special sprinklers as defined by the National Fire Protection Association (NFPA), and are cULus Listed for extended coverage in combustible and non-combustible construction. The cULus Listing was achieved using full-scale fire tests within wood truss construction.

The Model V-EP (Eave Protection) Specific Application Attic Sprinkler is designed to provide superior fire protection in combustible and non-combustible sloped attic spaces when compared to standard spray attic protection. With specific application criteria for use with Model VK697 Attic Upright Specific Application Sprinklers, Viking Attic Sprinklers provide an extended coverage spacing alternative to standard spray sprinklers. They make it possible to use a 3 branch line design for spans up to 80 ft. (24,4 m) and a 5 branch line design for spans greater than 80 ft. (24,4 m) and up to 100 ft. (30,5 m). This eliminates the need for branch lines and greatly reduces the number of required sprinklers and associated material and installation costs. Model V-EP models also have lower minimum flow and pressure requirements than competitive products. Listed for specific pitches 2½:12 ≤ 6:12, and spans 80 ft. and 100 ft.

The Viking Attic Upright VK697 is a specific application attic sprinkler that provides superior fire protection in combustible and non-combustible sloped attic spaces when used in conjunction with Viking’s model V-BB (Back to Back) and V-SD (Single Directional), and V-HIP specific application sprinklers. Installed in the upright position, with the deflector parallel to the roof, the Attic Upright used in combination with the model V-BB increases the allowable span from 60’ to 80’ (18,3 m to 24,4 m).  Viking Attic Upright sprinklers can be installed with either steel (black or galvanized) or CPVC piping, and allow the use of CPVC to feed the protected space below the attic (CPVC allowed on wet pipe systems only). They are available in brass or with corrosion-resistant Electroless Nickel PTFE (ENT) coatings where salt water and other corrosive elements are a consideration. Viking Attic Upright sprinklers are cULus Listed with specific application guidelines for use as special sprinklers as defined by the National Fire Protection Association (NFPA), and are listed for specific pitch range 4:12 to 12:12. (Note: The Model VK697 is covered by the following U.S. Patent No.: 8,083,002 owned by Tyco)

Viking Specific Application Early Suppression Fast Response (ESFR) Pendent Sprinkler VK514 incorporates the capability to suppress specific high-challenge fires. The addition of a larger K-Factor allows protection of higher hazard commodities at greater ceiling heights with lower end-head pressures.  K28.0 sprinklers can provide flexibility of fire protection designs and eliminate the use of in-rack sprinklers when protecting high piled storage of​ certain specified materials up to: UL - 43 ft. (13.1 m) with ceilings up to 48 ft. (14.6 m) and FM - 50 ft. (15.2 m) with ceilings up to 55 ft. (16.8 m) OR 45 ft. (13.5 m) with ceilings up to 50 ft. (15.2 m) Viking VK514 ESFR Pendent Sprinklers are primarily intended to protect the following types of storage, which tend to produce severe-challenge fires: palletized and solid pile storage and single, double, and portable open rack storage (no open-top containers or solid shelves). The VK514 is listed to utilize a minimum aisle width of 6’-0” (UL - 43’ storage and FM - 45' storage) or 8’-0” (FM - 50’. storage).

Viking QR COIN® Sprinklers are quick response specific application sprinklers for combustible interstitial (concealed) spaces (i.e., between floors, as well as low pitch attics that meet the criteria shown in the figures in this data page). These upright sprinklers are designed for use in specific light hazard combustible, as well as non-combustible, concealed spaces requiring sprinkler protection. The glass bulb operating element and special deflector combine speed of operation and area of coverage to meet the crucial fire protection requirement for shallow space combustible concealed spaces. The Electroless Nickel PTFE (ENT) coating has been investigated for installation in corrosive atmospheres and is listed/approved as corrosion resistant as indicated in the Approval Charts.

The Viking Swing Check Valve is a general purpose rubber-faced check valve approved for use in fire protection systems and is rated with a 300 psi maximum working pressure. The Model D-1 (flange x flange) and G-1 (groove x groove) Swing Check Valve is manufactured with a ductile iron body, brass seat, and a rubber-faced clapper assembly, hinged to a removable access cover for easy inspection and maintenance. The valve may be installed vertically or horizontally with access cover facing up.