Pavlis a Hartmann s.r.o. Active Fire Protection (AFP)

PH Hose bridge provides protection for hoses or cables etc. by means of two channels, each of 85 mm in diameter, while insuring a method of safe passage for heavy fire-fighting machinery or other vehicles. Weight - 16 kg Max width -  445 mm Passage width - 350 mm Length -  800 mm Height - 105 mm Material -  rubber SBR PH Max load per bridge -  7 tons Cat. No. -  vv 400

Weight -  570 g Working pressure -  2 MPa Cat. No. -  vv 273

It is used to connect the coupling A110 and the suction hose RD 130 female threaded fitting. Weight -  1.8 kg Working pressure -  1.6 MPa Cat. No. - vv 247

The flexible suction and discharge hose is designed for the booster fan PH-VP600.   Length of the hose in extended state  -  4 850 mm Hose diameter  -  500 mm Dimensions in transport position  -  610 x 610 x 580 mm Weight  -  9.4 kg

Hydrant foam system with D33 semi-rigid hose is yet another of the certified fire fighting systems marketed by Pavliš a Hartmann. This product diversifies the complete line of D19, 25 and 33 hydrant systems and the D25 foam-inducing system with semi-rigid hose with yet another already certified foam inducing system.

Fire hydrant systems with semi-rigid hose represent a very effective fire-fighting facility with an uninterrupted supply of water immediately. The design of the system allows quick operation by a single person. This recess-mounted system has a stainless steel frame and a door to facilitate finishing work after masonry.

An insulated fire hose designed especially for professional and volunteer fire brigades, both for sport and action purposes.  It can be used at temperatures from -30°C to +70°C. The outside colour of the polyester fibre is white with three yellow reflective strips; the inside EPDM smooth-rubber liner is black.

This hose is made of softened PVC reinforced with a shock-proof rigid PVC spiral provided with suction hose screwed fitting A-110 PH-Sport. The hose is designed for fire-fighting competition or common use.

This hose is made of softened PVC reinforced with a shock-proof rigid PVC spiral provided with suction hose screwed fitting A-110 PH-Sport. The hose is designed for fire-fighting competition or common use.

Weight - 1.3 kg Working pressure - 1.6 MPa Cat. No. -  vv 154

PVC hose made of super-elastic mixture reinforced with a shock-proof rigid PVC spiral. PVC hose made of super-elastic mixture reinforced with a shock-proof rigid PVC spiral. Special PVC mixture provides high elasticity and durability.

Highly flexible PVC hose is made of super-elastic shockproof material with a spiral. The hose is designed for fire-fighting competition or common use.

Hydrant foam system with D33 semi-rigid hose is yet another of the certified fire fighting systems marketed by Pavliš a Hartmann.   The system includes   Steel cabinet with a reel (W 1190 x H 800 x D 340) surface treated with RAL 3000 (red) or RAL 9001 (white) powder coating for indoor environment. D33 admixer for HS application with a ball valve. D33 connecting hose, 1.4 m long. D33 hose, 20 or 30 m long. Tank with foamer (20 L). Fire foam inducing nozzle for heavy foam with a ball valve. Suction hose with stainless steel tube.

Designed as the intake valve of the hydrant system with lay-flat hose C52. Weight (kg) without coupling - 1.51 coupling Al alloy - 1.73 Ms coupling - 2.28 Working pressure - 1.6 Mpa Material - Ms 80 C52 coupling - Ms or Al alloy Without coupling - Cat. No - . has 100 Coupling Al alloy - Cat. No. - vv 211 Coupling Ms - Cat. No. - vv 210  

Hydrant cabinet – made of 1 mm steel sheet. Pressurized water supply, brought through the centre of the reel, enabling immediate use of the system. Powder coated surface treatment designed for indoor environment (outdoor design possible by agreement with the manufacturer). Solid or glass-panelled door. 19 or 25 mm PH – stabil D semi-rigid hose. Nickel-plated brass ball valve. D 25 spray fire nozzle consisting of a polypropylene body and revolving head. The revolving head enables the user to set a full or spray stream with an adjustable spraying angle within the range 0 – 110° and to shut off the nozzle. Connection hose used to connect the system to water main. Hydrant system with D19 mm semi-rigid hose 650 x 650 x 175 mm – 20 or 30 m hose can be used. 710 x 710 x 135 mm – only 20 m hose can be used. Only fire nozzle with 6 mm equiv. diam. is used – flow rate Q < 1.1 L/sec. Hydrant system with D25 mm semi-rigid hose 650 x 650 x 210 mm – only 20 m hose can be used. 650 x 650 x 285 mm – 20 or 30 m hose can be used. 710 x 710 x 245 mm – 20 or 30 m hose can be used. Nozzle options: equiv. 6 mm diam. – flow rate Q < 1.1 L/sec equiv. 10 mm diam. – flow rate Q > 1.1 L/sec.

Fire hydrant system with semi-rigid hose is a very effective fire-fighting facility with an uninterrupted supply of water immediately It is especially beneficial where large amount of water up to 200 litre/min is required.

Insulated fire hose designed especially for hydrant cabinets. It can be used at temperatures from -30°C to +70°C. It is marked by two colour strips: blue- red. The outside colour of the polyester fibre is white, the inside rubber liner is black. The hose is certified according to CSN EN 14 540.

An insulated fire hose designed especially for professional and volunteer fire brigades, both for sport and action purposes.  It can be used at temperatures from -30°C to +70°C. The outside colour of the polyester fibre is white with three yellow reflective strips; the inside EPDM smooth-rubber liner is black.

PVC hose made of super-elastic mixture reinforced with a shock-proof rigid PVC spiral. PVC hose made of super-elastic mixture reinforced with a shock-proof rigid PVC spiral. Special PVC mixture provides high elasticity and durability.

This hose reel is designed to be mounted on fire engines, but can be installed elsewhere. It can be fitted to the floor, wall and ceiling. Dimensions (W x L x H)  -  525 x 690 x 585 mm Weight - 27 kg Hose -   D25 semi-rigid, 60m long Connecting hose -  D25 semi-rigid, 2m long Nozzle -  Tajfun-Profi D Max. working pressure: 1,6 MPa

Steel cabinet with swinging arm and hose reel 19 or 25 mm PH – stabil D semi-rigid hose 20 or 30 meters long D 25 spray fire nozzle with equivalent 6 or 10 millimetres equiv. 6mm – flow rate Q < 1,1 l/sec equiv. 10mm - flow rate Q > 1,1 l/sec Connection hose D19 or D25, length 1,4 m, with ball valve 3/4´´ or 1´´ used to connect the system to water main

Weight (kg) without coupling - 1.65 coupling Al alloy - 1.87 Ms coupling - 2.42 Working pressure - 2.5 Mpa Material - Ms 80 C52 coupling - Ms or Al alloy Without coupling - Cat. No. vv 114 Coupling Al alloy - Cat. No. vv 103 Coupling Ms - Cat. No. vv 104    

Hose coiler is used to roll up fire hoses, e.g. after a fire action, exercise or competition. Designation - Hose coiler 20-B/C Pavliš a Hartmann Use - Rolling-up hoses on the site For hoses -  Hose B and C max. length 20 m Weight -  7 kg Outer dimensions (mm) -  working position 380 x 1200, folded up 380 x 750 Material -  Aluminium and stainless steel Cat. No. -  vv 169

Fire hydrant systems with semi-rigid hose represent a very effective fire-fighting facility with an uninterrupted supply of water immediately. The design of the system allows quick operation by a single person. This recess-mounted system has a stainless steel frame and a door to facilitate finishing work after masonry.

Hydrant Systems meet the norm CSN EN 671-1. The cabinets feature hi body sturdiness, stability and new design. Apart from basic colours red structural RAL 3000 white structural RAL 9003 and anthracite RAL 7016 structural, Pavlis offers even different colour design.

Fire hydrant system with semi-rigid hose is a very effective fire-fighting facility with an uninterrupted supply of water  immediately. The design of the system allows quick operation by a single person.

Pavlis a Hartmann s.r.o. nvv 080 hydrant system with D33 semi-rigid hose is a very effective fire-fighting facility with an uninterrupted supply of water immediately. Approved to CSN 73 0873 and CSN EN 671-1, it is especially beneficial where large amount of water up to 200 litre/min is required. The nvv 080 hydrant system includes: Steel hydrant cabinet is designed for wall or recess mounting. To facilitate pressure-water supply into the system, the cabinet is equipped with two knock-out holes at the top and bottom of both side walls of the cabinet. Its surface is textured, coated with RAL 3000 (red) or RAL 9016 (white) tint powder for indoor applications.  Hose-reel is mounted on a swinging arm. It consists of two side discs reinforced with wire of 8mm diameter.  D33 semi-rigid hose is manufactured by Pavlis a Hartmann under trade name PH – stabil - D33. Hose length is 20 or 30m.  Tajfun Turbo spray nozzle (equivalent to 13 mm) with a revolving head.  D33 connection hose of 1.5m length with ball valve 5/4” PN30 DN32.

Hydrant foam system with D25 semi-rigid hose is yet another of the certified fire fighting systems marketed by Pavliš a Hartmann. The system includes Steel cabinet with reel (W 950 x H 650 x D 285); surface treated with RAL 3000 (red) powder coating for indoor environment. D25 admixer for HS application with G1” ball valve. D25 connecting hose 1.4 m long. D25 hose 20 or 30 m long. Tank with foamer (15 L). Fire foam inducing nozzle for heavy foam with a ball valve. Suction hose with a stainless steel tube.