Integrated Fire Protection Fire Protection

D2ASM is a dry chemical fire extinguisher designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection. All extinguishers are designed to fit most wall mounted storage cabinets.

D10PCM is a dry chemical fire extinguisher designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection. All extinguishers are designed to fit most wall mounted storage cabinets.

Pyro Chem multipurpose ABC dry chemical powder is highly efficient to extinguish A, B, C & D class fires. For Class B fire, there is no match for the effectiveness of Pyro Chem Purple. Pyro Chem multipurpose ABC & Pyro Chem purple K dry powder is capable to resist influences of climatic extremes both temperature and humidity.

D5AMD-SM is a modular type dry powder fire extinguisher is filled with ABC type Multipurpose Dry Chemical Powder enriched with MAP. It is an automatic extinguisher and widely applicable for general occupancies. Nitrogen gas is used in the extinguisher as the expelling agent.

IFP UNILIGHT AGFFF TYPE 1/3 is intended for use on Class B hydrocarbon fuels such as gasoline, kerosene, diesel etc. It is applicable with low and medium expansion discharge devices for covering and extinguishing fires of Class A and Class B.

IFP THERMAL FOAM is a non-toxic synthetic foam concentrate made of tensides, stabilizers, anti-freeze etc. and can be used in all types of high expansion foam generating equipment. IFP THERMAL FOAM is an effective/stable synthetic foam concentrate especially for application to system under hot environment, fires of class A and class B like wood, paper products, plastics, rubber, hydrocarbon fuels etc.

IFP CLASS A FOAM, is a foam concentrate for use in Class "A" fire, is a non-corrosive, non-toxic, biodegradable foam concentrate. When mixed with water in the correct proportion, it changes the properties of water. It reduces the surface tension of the water, and produces foam, which allows the water to cling to vertical or horizontal surfaces without run off.

IFP HAZMAT FOAM is a non-toxic synthetic foam concentrate made of tensides, stabilizers, biopolymers, solvents etc. and can be used in all types of medium and high expansion foam generating equipment’s and also in Compressed-Air Foam System (CAFS). It cools and helps to suppress toxic vapour and is suitable for use with fresh as well as brackish / salt water of varying proportion without altering the efficiency.

IFP AR FP PLATINUM 3/6 combines the firefighting efficiency of conventional FP for rapid knock down and burn-back resistance both for hydro carbon & polar solvent fuels fire hazards. IFP AR FP PLATINUM 3/6 concentrate is produced from hydrolysed Protein Concentrate, special type of fluorinated surface active agent in combination with biopolymer, stabilizer and preservatives to make it suitable for protection of high risk areas.

IFP AR FFFP TYPE 3/3 is multipurpose alcohol resistant film forming foam liquid concentrate is suitable for use in hydrocarbon and polar solvent fire hazards. It is a multipurpose foam liquid useful both for hydrocarbon fuel fires as well as polar solvent fuel fires. It contains natural protein and no harmful synthetic detergents.

Pyro Chem multipurpose ABC dry chemical powder is highly efficient to extinguish A, B, C & D class fires. For Class B fire, there is no match for the effectiveness of Pyro Chem Purple. Pyro Chem multipurpose ABC & Pyro Chem purple K dry powder is capable to resist influences of climatic extremes both temperature and humidity.

IFP FIREKIL PBC is a highly efficient BC type dry chemical extinguishing powder. It has the following features: It is based on potassium bicarbonate, one of the most effective agents against B and C class fires The active ingredient is mixed with additives for improving its fluidity and making it weather resistant It is Protein Foam, AFFF and AR-AFFF foam compatible

IFP PF 6 is Protein Foam Concentrates containing hydrolysed protein concentrate, stabilizers, preservatives etc. It is having a superior burn-back resistant character over hydrocarbon fuel fire. Once extinguishment achieved it gives a superior foam blanket which prevents the fuel from reignition.

IFP FP 3 is a specially formulated fluoroprotein foam concentrate, containing hydrolysed protein concentrate, fluorosurfactants, solvents, stabilizers, biocide etc. The foam is highly resistant to fuel pick-up and therefore creates very stable foam blanket. It is intended for use at 3% proportioned solution in both fresh and salt water.

IFP FIREKIL SBC is an efficient BC type dry chemical extinguishing powder. It has the following features: It is based on sodium bicarbonate The active ingredient is mixed with additives for improving its fluidity and making it weather resistant It is compatible with Protein Foam, AFFF and AR-AFFF foam

IFP AR FP PLATINUM 3/3 combines the firefighting efficiency of conventional FP for rapid knock down and burn-back resistance both for hydro carbon & polar solvent fuels fire hazards.  FPAR FP PLATINUM 3/3 concentrate is produced from hydrolysed Protein Concentrate, special type of fluorinated surface active agent in combination with biopolymer, stabilizer and preservatives to make it suitable for protection of high risk areas.

D1ASM is a dry chemical fire extinguisher designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection. All extinguishers are designed to fit most wall mounted storage cabinets.

IFP UNILIGHTAFFF TYPE 6 is intended for use on Class B hydrocarbon fuels such as gasoline, kerosene, diesel etc. It is not recommended for use on fuels having considerable water solubility like alcohols, ketones etc. IFP UNILIGHT AFFF TYPE 6 is suitable for use in special appliances like crash tenders/ RIV where rapid extinguishment with limited quantity of foam is required.

IFP-HX-65L high expansion foam generator is suitable for rapid coverage and total flooding of voluminous areas even against high back pressure. IFP-HX-65L is driven by easy start petrol engine as a result of which there is no loss of (normally about 35%) water required for water powered foam generator.

IFP UNIFOAM is a non-toxic synthetic foam concentrate made of tensides, stabilizers, antifreeze etc. and can be used in all types of high expansion foam generating equipment’s.  IFP UNIFOAM is an effective synthetic foam concentrate to extinguish Class A like wood, paper, products, plastics, rubber etc. and Class B i.e., hydrocarbon fuels.

IFP FP 6 is speciallly formulated fluoroprotein foam concentrate, containing hydrolysed protein concentrate, fluorosurfactants, solvents, stabilizers, biocide etc. To make it suitable for rapid extinction and superior burn-back resistant in hydrocarbon fuel fire.

IFP-HX-100L high expansion foam generator is suitable for rapid coverage and total flooding of voluminous areas even against high back pressure.IFP-HX-100L is water powered pelton wheel driven. It can be used also in fixed foam system.

The Clean Agent Fire extinguisher is filled with DuPont HFC - 236fa (FE-36) the most widely used zero ozone depleting replacement for Halon 1211 in portable fire extinguishers and used for Class A, B and C fires. FE-36 is discharged as a stream of liquid droplets that cease the combustion process through heat absorption and a chemical interaction.

D5ACM is a dry chemical fire extinguisher designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection. All extinguishers are designed to fit most wall mounted storage cabinets.

D2ASM is a dry chemical fire extinguisher designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection. All extinguishers are designed to fit most wall mounted storage cabinets.

IFP UNILIGHT AGFFF TYPE 3/3 is intended for use on Class B hydrocarbon fuels such as gasoline, kerosene, diesel etc. IFP UNILIGHT AGFFF TYPE 3/3 is suitable for use in special appliances like storage tanks, process areas, warehouses, loading areas, docs and other local risks involving a spilled fuel fire.

IFP UNILIGHT AFFF TYPE 1 is a specially formulated nontoxic clear liquid with no stratification or turbidity. It has a unique combination of fluorochemical and hydrocarbon surfactant along with solvent, stabilizers and preservatives that gives it a superior fire knockdown performance on all types of hydrocarbon fires.

D10AMD-SM is a modular type dry powder fire extinguisher is filled with ABC type Multipurpose Dry Chemical Powder enriched with MAP. It is an automatic extinguisher and widely applicable for general occupancies. Nitrogen gas is used in the extinguisher as the expelling agent.