Cervinka Active Fire Protection (AFP)

Cervinka 0099 is a hydrant hose.

Cervinka 0069T is a hose reel with a wall holder.

Cervinka 0003 is a 4kg powder portable fire extinguisher.

Cervinka 0005c is a 6kg powder portable fire extinguisher.

Cervinka 0007 is a 2kg CO2 portable fire extinguisher.

Cervinka 0058 is a 1kg portable fire extinguisher.

Cervinka 0059 is a 1kg portable fire extinguisher.

Cervinka 0060 is a 6kg portable fire extinguisher.

Cervinka 0137 is a 5kg portable fire CO2 extinguisher.

Cervinka 0105 is a plastic box for fire extinguisher.

TRUCK VIPER is automatic extinguishing system and is used to protect trucks, tractors and farm vehicles. Basic informations: Volume of extinguishing agent: 1000g +/- 10g Protected area: 2m3 Length of tube: 4.1m Hose diameter: 18mm The polyamide hose is filled with the gas agent FE-200 (heptaflurpropane) and is closed. In the event of a fire, the hose will burn through at the point where the flame is created and start extinguishing the engine's protected area without causing major damage. There is no danger to the occupants of the vehicle. After extinguishing the fire, they evaporate and no extinguishing agent remains in the room. Installation of TRUCK VIPER is very easy. The product is available in two variants: without manometer including manometer for an easy check of its functionality The operating pressure at 20 ° C is 2.0 bar. When the engine is running, the pressure will increase up to 10 - 12 bar at 90 - 100 ° C. General information about TRUCK VIPER can be downloaded HERE Illustrative picture

It is mainly used in workplaces with fine mechanics, electrical equipment or flammable liquids. It is not appropriate to use for extinguishing of bulk solids and combustible dusts. The big advantage is that filling after use is evaporated. It can be used for extinguishing electrical equipment under voltage up to 1000 V, from minimum distance of 1 m. This is a pressurized gas containers. After use, extinguisher is refillable.  

Spanners - Hose key

Spanners - Hose key

Spanners - Hose key

Aluminium suction couplings are used for connection of suction hose with pressure-suction coupling. Couplings are sold in pair.

Aluminium suction couplings are used for connection of suction hose with pressure-suction coupling. Couplings are sold in pair.

Aluminium suction couplings are used for connection of suction hose with pressure-suction coupling. Couplings are sold in pair.

Aluminium suction couplings are used for connection of suction hose with pressure-suction coupling. Couplings are sold in pair.

Box is suitable for 2 pieces of fire extinguishers 6 / 9 kg for trucks. It protects fire extinguishers against weather, dirt, vandalism.

Special holder is suitable for holding powder fire extinguisher 4 / 6 kg. It is used in cars, trucks, buses, tractors. Including easily adjustable fastening straps.

Wall holder for fire extinguisher

Water: 9 l Foam: 6 / 9 l Powder: 12 kg CO2: 2 / 5 kg

Color: white Box is suitable for the location of fire extinguisher 9 / 12 kg for parking , shopping malls, airports, hospitals, schools and other buildings. It protects fire extinguisher against weather, dirt, vandalism and theft.  

Color: red Box is suitable for the location of fire extinguisher 9 / 12 kg for parking , shopping malls, airports, hospitals, schools and other buildings. It protects fire extinguisher against weather, dirt, vandalism and theft.  

Holder for fire extinguisher with sleeves

Wall holder for fire extinguisher

Wrapper is simple and economic protective equipment against dust and other impurities that may fire extinguisher surface (continually, repeatedly) to pollute. Sleeve is made from a firmer textile cloth with plastic looks.