Bristol Uniforms Fire Protection

Fixed linings that provide easy access through bottom for repair and examination of outer shell. Heavy duty brass zipper with NOMEX® zipper tape 4" wide protective overlap with 2" hook and loop closure. Radio pocket on left breast. Two microphone loops on front panels. Two external bellowed pockets with drain holes. Pocket flaps close with hook and loop fastening Pocket flaps have fabric tab for easy opening with a gloved hand. Two vertical slash pockets under storm flap 4" high collar with throat piece and hook and loop closure. Knitted wristlets with thumb loop for full protection even when arms are raised above the head. Main outer seams are topstitched for extra strength.Colours: Yellow/ Silver Trim.

LayerFlex garments are particularly useful when a fire service is faced with a range of operations requiring different levels of protection, and may need to switch between roles quickly. The mid-layer coat is a short style coat in Hi-Vis yellow with a silver reflective trim and a Gore-Tex® laminated lining. However, the collar is cut in Hainsworth’s TITAN1260 and has additional protection to comply with structural Standards, so that the neck area is fully protected when the XFlex outer coat is worn over the top. The mid-layer coat meets the Standard EN ISO 20471:2013 Class 3 for High Visibility clothing, and when worn together, the Layered Jackets meet EN469:2005 Level 2. The Top-Layer Coat and Mid-Layer Coats, selected by the Collaborative Framework, are worn together in combination with the XFlex structural trousers for full structural firefighting protection. Also available in Male sizes.

LayerFlex garments are particularly useful when a fire service is faced with a range of operations requiring different levels of protection, and may need to switch between roles quickly. The top-layer coat is similar in style and specification to a structural coat, but has no collar. When appropriate, the top-layer coat can be removed, providing more suitable levels of protection and performance when the immediate danger of fire is removed. This serves to improve ergonomics and comfort, and crucially can contribute to the lowering of heat stress in firefighters. The Top-Layer Coat and Mid-Layer Coats, selected by the Collaborative Framework, are worn together in combination with the XFlex structural trousers for full structural firefighting protection. Also available in Female sizes.

Manufactured from stainless steel/polyester reinforced Aramid knit Coated palm Anti-bacterial and anti-odour treatment Performance levels to EN388

43% gold face shield Manufactured to EN443: 2008 Large size 58 to 64 Optional extras : clear visor, torch lamp with fittings

High temperature polycarbonate vented shell Ratchet quick adjustment system Clear safety goggles (EN166) Manufactured to EN397

Manufactured to EN 15090:2006 Leather boot with rear pull-on tab Interior lining – Gore Crosstech, making a breathable barrier that provides protection against blood-borne pathogens Black full-grain cowhide leather water repellent upper Nitrile rubber sole 3M red reflective Steel toe cap and average 5mm thick insole, multi-layer construction Padded rear and front flexors Energy absorbing heel Lightweight with good fit due to internal elastic band at ankle, which keeps foot in place and prevents heel blisters Ankle protection, side anti-perforation panels and abrasion-resistant rubber over cap

43% gold face shield Manufactured to EN443: 2008 Standard size 50 to 58 Optional extras : clear visor, torch lamp with fittings

Manufactured to EN ISO 15090 type 3 Marine Fire Protection Equipment (MED) Certified Safety toe cap and anti-perforation mid-sole

Manufactured to EN ISO 20345: 2007 S3C1 WR SRB Black leather lace-up boot Interior lining with Crosstech Protective toe cap and inner sole

Glass fibre helmet Manufactured to EN397 Adjustable headband and chinstrap Visor manufactured to EN166 Supplied with aluminised neck curtain

Manufactured to EN443 and EN14458 MED (Marine Equipment Directive) Approved Integrated internal goggle visor and external visor Integrated size adjustment system

High impact and penetration resistant helmet shell Easily adjustable helmet size from outside Face shield and eye protection visor Manufactured to EN443: 2008

Two half bellow thigh pockets with drainholes One internal pocket Plain waist (no elastic) Two way zip covered with hook and loop fastening flap 50mm silver 3M Scotchlite™ reflective tape Standard EN469

Manufactured from fibre glass Three point rear ratchet height adjustment to fit all sizes Adjustable front headband Manufactured to NFPA 1971 Supplied complete with visor

Manufactured to EN ISO 20347: 2007 02 SRC H1 HRO WR FO Black leather lace-up boot Interior lining Goretex Nitrile rubber sole Protective toe cap

Manufactured to EN ISO 15090: 2012 Black leather boot with pull-on loops Nitrile rubber sole Protective toe cap

Structural fire glove Palm has Silicone coated Kevlar® Back has Nomex® with knuckle protectors Goretex® moisture barrier Manufactured to EN659: 2003 + A1: 2008 + AC: 2009 and MED

Clear visor Manufactured to EN443: 2008 Medium size 52 to 62 Optional extras : gold visor, integrated lighting module

Manufactured to EN ISO 345: 2011 and EN 15090: 2012 F21 Rubber boot with pull-on loops Oil and acid resistant sole Canvas lining

Coat features: A short style coat designed with ergonomic fit Two outer lower welt pockets with mitred flaps One internal patch pocket  Plain cuffs with Neoprene anti-wicking barrier Neoprene anti-wicking barrier in hem Hanger loop on under collar Moulded zip front with hook and loop fastened flap, Neoprene lined Flip back throat tab Gore-tex lined Articulated sleeves Standard EN469 Level 2 Trouser features: Standard waist trousers with side elastication Fixed braces crossed at back Back seat with yoke The trouser measurements provide adequate overlap, so that there is no gap between coat and trousers when bending Self cloth outer curved kneepads, twin stitched seam and Aramid felt internal knee pads One internal hip patch pocket Plain trouser hems with Neoprene anti-wicking panels Standard EN469 Level 2

Leather glove Nomex® knitted wristlet Modacrylic fleece lining laminated to Gore RT7100 PTFE moisture barrier Manufactured to NFPA 1971

Coat features: MED (Marine Equipment Directive) Approved Meets EN469:2005 Level 2 Manufactured from: - Outer Fabric: HR2YE, yellow; Moisture Barrier: Flame Retardant Polyurethane; Inner Lining: Thermal Barrier Quilted to FR Cotton Fleece lined high collar Zip front with hook and loop fastened flap Plain cuffs Trouser features: MED (Marine Equipment Directive) Approved Meets EN469:2005 Level 2 Manufactured from: - Outer Fabric: HR2YE, yellow; Moisture Barrier: Flame Retardant Polyurethane; Inner Lining: Thermal Barrier Quilted to FR Cotton Outer patch pocket right leg One internal hip pocket Braces fastened with hook and loop through brace loops at front Hook and loop fastened fly

Clear visor Manufactured to EN443: 2008 Large size 57 to 65 Optional extras : gold visor, integrated lighting module

Coat features: MED (Marine Equipment Directive) Approved Meets EN469:2005 Level 1 Manufactured from:- Outer Fabric: HR2YE, yellow; Inner lining: Thermal Barrier Quilted to FR Cotton Fleece lined high collar Zip front with hook and loop fastened flap Plain cuffs Trouser features: MED (Marine Equipment Directive) Approved Meets EN469:2005 Level 1 Manufactured from:- Outer Fabric: HR2YE, yellow; Inner lining: Thermal Barrier Quilted to FR Cotton Outer patch pocket right leg One internal hip pocket Braces fastened with hook and loop through brace loops at front Hook and loop fastened fly

Manufactured to NFPA 1971 – 2013 Steel mid-sole Steel toe cap

Rescue Coat is based on Bristol’s popular RescueFlex jacket, but incorporates XFlex-style sleeves. It is to be worn with the XFlex trousers as an alternative to the full structural XFlex coat, for emergencies and rescue operations that do not specifically need full protection to structural fire levels. It has a Hi-Vis yellow outer shell with Gore-Tex® laminated lining, and also features vented underarms for greater air circulation. This garment meets the Standard EN ISO 20471:2013 Class 3 for High Visibility clothing and ISO 16073:2011.

Rescue Coat is based on Bristol’s popular RescueFlex jacket, but incorporates XFlex-style sleeves. It is to be worn with the XFlex trousers as an alternative to the full structural XFlex coat, for emergencies and rescue operations that do not specifically need full protection to structural fire levels. It has a Hi-Vis yellow outer shell with Gore-Tex® laminated lining, and also features vented underarms for greater air circulation. This garment meets the Standard EN ISO 20471:2013 Class 3 for High Visibility clothing and ISO 16073:2011.