Fire Protection Suits(192)
Pierce’s timeless industry-standard chassis now offers big improvements. The all-new Saber® chassis was built with the value-driven firefighter in mind – delivering advanced visibility, greater space, improved ergonomics, and streamlined serviceability at an affordable price. Visibility and space Exceptional visibility is achieved through a large, bonded, single-piece, wrap-around windshield The smaller engine tunnel is lower and more contoured for increased occupant space, particularly up front for the driver and officer The forward roof design offers a cathedral ceiling feel with increased frontal visibility and more configurable space Ergonomics Exterior door handles are functionally designed for a firefighter’s gloved hand The steps are lower to the ground and offset to function like a stair step, making it easier for firefighters to enter and exit the cab The console and metal overhead switch panel are ergonomically designed for maximum convenience and comfort, keeping all of the gauges & switches within easy reach of the driver Serviceability Easy access to the defroster & wiper motors through removable officer-side panels Power distribution relocation provides more interior space and fewer harnesses in the frame & up through the cab for easier servicing Built-in wire raceways throughout the cab reduce the chance of wire chaffing & make it easier to service or add cab harnesses & wiring Maneuverability Maximum 50-degree cramp angle and 15-degree angle of approach for improved maneuverability in tight areas and challenging situations
The Edwards Signaling 872DPO-R5 projector vibrating horn is a 240 V AC low-current, high decibel double horn for heavy-duty, indoor use. The double projector is designed for bi-directional signalling without decibel loss. Supplied complete with mounting plate for easy installation. It is used in industrial, commercial, and institutional applications for timing, paging, and alarm signalling.
The Bio-Ex FLUOFOAM 1 is a fluorosynthetic foam AFFF, based on the combination of surfactants selected for their foaming property and their resistance to dehydration and heat. Foaming power: FLUOFOAM 1 is usable at Low Expansion. This fluid foam is not contaminated on hydrocarbons and enables a forceful application. FLUOFOAM 1 is usable at medium expansion to create a foam blanket to protect against burn back. Fuel fires: FLUOFOAM 1 is efficient on all hydrocarbon fires, such as diesel, kerosene, petrol and so on Environment: FLUOFOAM 1 is easily biodegradable FLUOFOAM 1 can be used with tap water, sea water and brackish water at 1% on hydrocarbon fires. It is compatible with dry extinguishing powders and it is suitable with all kind of known equipment.
The Savox C-C500 is a multi-purpose remote speaker microphone that can be used with or without a headset. The durable and waterproof (IP 67) Savox C-C500 is a communication solution that provides various optional functions for different types of applications, even when used in potentially explosive environments (ATEX Approved). Additionally, the internal microphone and speaker is equipped with interface electronics and a rugged quick release jack that adapts any type of headset to your two-way radio. Thanks to the two large push-to-talk buttons, transmission is secured, even when used from inside of protective gear and clothing. Key benefits: Can be used with or without a headset Adapts any Savox headset to your two-way radio Two large push-to-talk buttons Durable and water resistant (IP67) Rotating belt clip Ergonomic Optimal size
The CPF Industriale AS748 outdoor fire cabinet is corrosion-proof and ISO 9227 rated. It comprises a flexible fire hose approved in compliance with EN 14540. It includes features such as black rubber heads, hose holder support and seal lock. Its simplified drilling offers easy installation.
Bauer Compressors P0 air purification system purifies high pressure air to a quality that meets or exceeds the requirements of CGA Pamphlet G-7, compressed air for human respiration, ANSI / CGA G-7.1, commodity specification for Air, Grade E, and all other recognised standards for breathing air. The Bauer P0 processes 3,200 cf of air per cartridge at standard inlet conditions.
The Carson SC-1002 Volunteer siren features the Horn Ring Cycler (HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with the vehicles horn. Two lighted rocker switches are also included for controlling emergency lights. This siren is designed to work with a 100-watt speaker and ensures you the strength to get you where you need to go and be heard like one of the big fire trucks. The siren tones may be changed or disarmed using an internal Dip switch. An output indicator light is on the face of the siren for diagnostic purposes. The light controls are capable of switching up to 20 amps. The siren is LED backlit and is installed using heavy duty screw down terminals for power and a detachable connector for the speaker and lights. The amplifier and light controls are fused separately on the back of the unit. As with all Carson Sirens products, the SC-1002 Volunteer is backed by a no-hassle 5-year limited warranty. The SC-1002 Volunteer Siren offers the reliable performance, and rugged durability with consistent quality that comes with every Carson Siren.
The Chem-Trap spill containment pool offers instant chemical containment and resistance in one. Not only does the popup pool feature the same portable spill containment as the Tank Trap, but it also offers complete chemical resistance for containment of spilled chemicals, pesticides, acids, washing solutions and caustics. The popup containment pool features a heavy-duty puncture-resistant base, a smooth interior for easy cleanup and a high visibility colour scheme. No inflation or assembly is needed and this popup containment pool is re-usable. The Containment Popup Pool with heavy-duty base is ideal for storing or containing drums and other heavy objects if using on a rough surface. Every popup pool offers an optional drain for transferring, storage, or linking. The containment pool can be used with an optional ground tarp and optional gravity flow bags for additional capacity. Chem-Trap spill containment pool product features Chemical-resistant Deploys in seconds Lightweight No inflation or electricity needed
a.b.s Fire Fighting 53224, part of CHAMPION SUPER, is a fire hose made externally in polyester, while the inner lining is EPDM elastome. The fire hose is resistant to weather, aging and mould. It is also light and handy, enabling storage in small cabinets.
A multi-wear, multi-threat garment providing vapour, liquid, and FR protection for chem/bio incidents. ICG Technical rescue CBRN Ensemble Certified to meet NFPA 1994/Class 2 and NFPA 1992. Guards against exposure to hazardous waste, drug labs, biological threats and domestic terrorism agents. Rugged GORE™CHEMPAK® Ultra Barrier fabric features thin, lightweight and high-strength PTFE film sandwiched within tough DuPont™ Nomex® outer and inner layers. Streamlined design and light weight deliver optimum comfort and natural freedom of movement. Rugged construction allows you to perform in the most challenging of circumstances. Re-usable for multiple wears and washings, if not exposed or contaminated. Certified for use with Gore G9492 gloves and OnGuard HAZMAX® 87012 Boots. ICG Features Tan colour. Wrist and leg cuff adjustments for secure fit. Top entry garment for ease of doffing and decontamination. Detachable frill hood interfaces with the Drager Panorama Nova face mask using a specially designed mask suit interface. Patches for hook and loop mounted ID badges.Add to Compare
Developed with the UK Fire & Rescue services, Microchem® 4000 Apollo is a fully encapsulated chemical suit designed for use in conjunction with self contained breathing apparatus (SCBA). Applications Chemical manufacturing Chemical handling and transportation Industrial hazardous waste handling Land reclamation and clean up Emergency services first response HAZMAT handling Microchem® 4000 coveralls meet the following European Norms: Type 3 EN14605 Type 4 EN14605 EN14126 EN1073-2 EN1149-1Add to Compare
Full-body splash protection for use by both emergency back-up teams and industrial use where a gastight suit is not required, yet still good protection is needed. Provides especially good protection against acids and alkalis. Designed to carry a breathing apparatus outside the suit. Trellchem® Splash 900 is fully certified in accordance with the European standard EN 14605. Garment materialThe Trellchem® Splash material is made of a strong and flexible polyamide fabric, which is single coated with yellow PVC. This construction provides a soft and durable material with good resistance to a wide range of industrial chemicals. Options: Double coated PVC fabric in orange or green colour. DesignNon-encapsulating design with face seal and without hump; BA worn outside the suit. For extra durability, the suit is fitted with reinforcements on elbows and knees. Face sealThe rubber face seal is anatomically designed for optimum safety and comfort. It provides the user with a tight, yet perfectly comfortable fit around the face. Option: Attached mask (possible only with some mask types). FootwearAttached yellow PVC safety boots, alternatively socks or open double legs. Option: Nitrile rubber/Firemen's boots. Gloves and attachmentsNitrile/Chloroprene rubber gloves as standard. The gloves are attached with the Trellchem® Bayonet glove ring system, which offers quick and simple glove exchange. Option: Chloroprene rubber, PVC or Viton®/Butyl rubber gloves. ZipperWatertight PVC zipper placed horizontally on the back, across the shoulders, for easy donning. The zipper is protected by a single splash guard (flap). StandardsTested and certified according to EN 14605, type 3 "liquid tight". UsersTrellchem® Splash suits are used by: Oslo Fire Dept., Singapore Civil Defence Force (SCDF), JO Tankers AS (Norway), Tessenderlo (Belgium), Odfjell ASA (Norway), Alert Disaster Control (Singapore), Petronas (Malaysia), Unitor AS (Norway), British Petroleum (Russia), Exxon Chemicals (Canada).Add to Compare
This product consists of: Total body protection, including breathing apparatus Coverall with attached hood fitting for all helmet types Each 2 sleeve and leg zippers 1 back zipper with back recess for breathing apparatus Description: to be worn with boots, the leg zippers allow a lot of room to move to be pulled on with gloves, the sleeve zippers ensure a tight fitting easy entry from behind, large Panorama-window special suspenders ensure a comfortable length adjustment large breast pocket for dosimeter, bellows pocket on the right thighAdd to Compare
The Proflair Multi Use air-fed chemical suit is a one-piece re-usable air-fed suit designed for all industries where protection is required from exposure to chemicals and particulates. The air hose delivers air to the suit through a tail sealed by a bung and external clamp. The air line is supported within the suit by a belt worn internally, fitted with an audible low-flow warning device. The air flow is distributed in the suit through a series of channels to the head and limbs giving a cooling diffused air flow around the users head and body. Users enjoy the protection of a suit (APF 200) without the need for mask fitting, giving free head movement and wide vision. Features: Unique high-strength, high-frequency welded seams with flat profile Excellent all round vision through a high-quality optically clear visor Optimised for active use giving freedom of movement and wide visibility Air distribution channels provide increased comfort and reduced wearer stress Emergency breather options available for safe egress in the vent of air flow failure Hoses with additional reinforcement and built in communications connections available Fall arrest harness and hard wire communication entry port optionsAdd to Compare
This fabric delivers permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents.Because time matters most, Tychem® ThermoPro is tested to provide at least one-hour breakthrough protection against 20 of the 21 ASTM F1001 chemicals.NOMEX®, the name firefighters have valued for years, is engineered into each Tychem® ThermoPro garment. So it doesn't melt or drip when exposed to heat or flame, while increasing escape time from flashfire conditions.Tychem® ThermoPro has been certified to meet NFPA 2112, Standard on Flame Resistant Garments for Protection of Industrial Personnel against Flash Fire. And although Tychem® ThermoPro is constructed for heavy use, it's also lightweight and easy to wear.Add to Compare
Components Jacket, bib trouser (optionally coverall), hood with firmly attached short vest, five-finger-gloves, (optionally boots), tote bag. Application In case of oil accidents and pipeline repair works, if the inflammation of leaking fluids is probable. If, for instance, an ISOPANT-equipped man is splashed over with petrol and the petrol inflames immediately thereafter then only the petrol film would burn off without injuring the man. The face is protected against splashes by the front-mounted ISOTEMP® glass window. Space requirement (in tote bag) Complete equipment with boots: 470 x 330 x 260 mm Complete equipment without boots: 450 x 210 x 250 mm Properties Permanently hard inflammable acc. to EN 531 Permanently waterproof acc. to EN 343 Absolutely windproof Largely resistant to acids and lyes acc. to EN 467 Surface resistance at 5 x 108 ohmAdd to Compare
Browse Fire Protection Suits
Protective Suit products updated recently
Firefighting is hot, hazardous, and let's face it, grueling work. But believe it or not, the job today has become even more challenging as firefighters must deal with increased heat loads, toxic substances and other physical challenges that make structural firefighting one of the most demanding professions on the planet. So, needless to say, being well-trained, physically fit, and safely equipped can make all the difference in the world. Evolving Technology The fact is, as heat loads and toxicity exposure risks increase due to modern synthetic construction, the ways in which fires are fought are changing as well. These shifts, combined with the revolution that’s taking place in firefighter protection technology, have led to new and exciting designs in firefighter personal protective equipment (PPE) offerings. Technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits Take the tried and true SCBA for instance. Since the invention of the first breathing apparatus in the late 1910s, their primary function has been air delivery. But today, technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits. Revolution Of Life-Changing Technology Consider this: the effects of technology today impact virtually every aspect of modern life. And the same is true for the fire service, as software, thermal imaging, and wireless communications capabilities become more mainstream on the fireground. In response to these new capabilities, the consensus organizations responsible for PPE performance standards (i.e. NFPA and EN) have increased standards by mandating certain electronic components for each firefighter. But performance of these components can be limited by the fact that only so many “parts” can be attached to an SCBA, or because some capabilities are simply out of reach from a budget perspective. Over time, these limitations create long-term implications when it comes to SCBA choice, because the breathing apparatus purchased today may have to be in use for the next 15 years or more. So, what are firefighters to do? Firefighters should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future It’s More Than Air Delivery Missed opportunities for more timely safety improvements – which keep up with the pace of technology – are rooted in a false assumption that all SCBA are comprised of separate, mechanical components – and that the SCBA function is only about respiratory protection. But air-delivery is not the issue because every SCBA meets the standards, and every SCBA delivers air well. Further, looking at the SCBA merely as a separate component for air diminishes its potential to serve as a revolutionary safety technology “platform.” Safety As A System Firefighters need more than the minimum performance from breathing apparatus To keep pace with the rapid improvements in firefighter safety, firefighters need more than the minimum performance from breathing apparatus. Instead, they should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future. I’m talking specifically about platform-type products that can be easily updated with the latest technology, as soon as it becomes available, to help protect them when their lives are on the line. Key Questions To Consider When Looking For An SCBA Include: Does the SCBA have features that allow you to see, hear, and react quickly to changing situations? Can the SCBA sizing be customized to best fit each firefighter? How many total batteries are needed for the SCBA, and how does that affect long-term costs? How well does it integrate with other systems, such as communication devices, portable instruments, etc.? Does the SCBA provide you, your team, and incident command with critical information to make effective, life-saving decisions? Can the SCBA be programmed to meet your standard operating procedures, such as audible and visual alarms at 50% remaining pressure? Is the facepiece reducing or adding to overall SCBA cost and complexity? How easily can the SCBA be updated to meet changing standards? How easily can integrated accessories or features, such as thermal imaging, be added as they are developed in the future? At MSA, we develop technologically-advanced safety equipment designed to help meet today's changing fireground dynamics. We’re committed to setting the pace for safety with continuous improvements and innovations in PPE. For today. For tomorrow. For the future.
Having the proper fire safety and chemical-protective equipment is imperative where risk of hazardous chemical exposure is great With businesses still facing the effects of the economic crisis with budget cuts, safety remains a key concern when it comes to finding cost-effective solutions without compromising public safety. One type of incident which many businesses are not properly equipped for is hazardous chemical exposure. Ian Hutcheson of Saint-Gobain Performance Plastics highlights the importance of having the proper personal protective equipment (PPE) necessary for chemical protection and states that such preventative measures can be achieved, even with budget restrictions. While the full-scale media hype about the "Global Financial Crisis" may be behind us, the follow on effects, such as continued tight budgets and reductions in government spending, are here to stay for the foreseeable future. The UK Government recently announced a major spending review with the aim of saving £83 billion over four years. As part of this, 192 QUANGOs will be abolished including Firebuy, the professional buying organisation for the Fire and Rescue Services. This focus on decreased spending means that now, more than ever, departmental budgets are being stretched and every purchase highly scrutinised to ensure the best possible cost efficiencies are achieved. But it is essential that a reduction in spending does not negatively affect public safety. Challenges for Fire and Rescue Services in responding to hazardous chemical exposure Recently, the UK's Audit Commission released a report entitled Business Continuity in the Fire and Rescue Services which investigated the plans the Services currently have in place to ensure that public safety can be upheld during short- and long- term disruptions (such as those caused by transport problems or adverse weather). Overall, the report found that many fire and rescue services have good business continuity management plans, but they cannot cope with every situation indefinitely. Fortunately, chemical incidents are infrequent but it is paramount that public safety is given priority and maintaining a robust, compliant arsenal of chemical-resistant personal protective equipment is essential to being readily equipped for an emergency situation.One area of particular concern was that, during these periods of disruption, less than a third of all Fire and Rescue Services could guarantee the availability of the sophisticated fire safety equipment needed in cases of hazardous chemical exposure.Advances are being made in the development of chemical-protective equipment Chemical protective suits reflect advancements in PPE There is, however, some good news for both the concerned public and those with stretched departmental budgets: advances are being made in the development of chemical-protective equipment that both improve quality and decrease total costs. This means that more Fire and Rescue Services will be able to fit equipment essential to chemical protection into their tight budgets. One such advancement is the availability of limited-life chemical-protective suits. These suits meet safety standards and fit the same application areas as their reusable counterparts, but offer both a smaller upfront purchase price and reduced total cost of ownership. These lower costs are achieved through minimal recertification, inspection, maintenance and storage expenses. Hopefully, decision makers will embrace the advances in chemical-protective equipment to ensure our fire services are readily equipped for all emergency situations. Ian Hutcheson - Saint-Gobain Performance Plastics