Eurotech - Experts & Thought Leaders

This new range of high-performance wireless detection, control, and alarm devices is based on a new protocol that offers exceptional capabilities, quality, and reliability. Combined with the user-friendly survey, install, commissioning and maintenance software, the Sygno-fi range revolutionizes the wireless fire systems market. The Sygno-fi wireless platform is suitable for both small-medium or large sites, with the capability to handle up to 128 devices per wireless translator and 240 per hybrid loop, along with a 10-year battery life on sensors, call points, and inputs and five years on output devices, sounders, and VADs. Dual redundant technology A significant benefit of the Sygno-fi system is that it is an open protocol, so it is easily integrated with multiple addressable fire alarm panels providing the flexibility and choice over which fire panel to integrate with. Sygno-fi devices use 60 communications channels to ensure interference and channel collisions are avoided, and each device uses dual redundant technology. The transmission path uses an alternate route, ensuring communication continuity So if one channel fails, another takes over automatically, ensuring no downtime and maximum performance and reliability. Also, if any expander module in the chain fails, the transmission path uses an alternate route, ensuring communication continuity. Each Sygno-fi translator supports up to 15 network expanders and the best possible redundant communication paths are identified and tested automatically during commissioning, providing the most reliable and robust communication pathway possible. Robust fire safety systems The bespoke software is designed to be user-friendly, allowing each Sygno-fi system to be specified with ease for the differing needs of each individual site. Michelle Agius, Eurotech’s Managing Director says: “We’re really excited at the introduction of our new Sygno-fi range. Our customers will really see the benefit of using Sygno-fi due to the performance of these devices combined with the ease and convenience of a non-wired system.” Here at Eurotech, they take pride in the post-sales support, technical service provision, and reliability when it comes to helping the user with their client’s fire system needs. They only provide the best, most robust fire safety systems and the Sygno-fi range encompasses those values. The Sygno-fi range is an open protocol and suitable for use with addressable panels such as their Toccare Touchscreen Fire Alarm Panel, which when partnered together offers an easy-to-use, exceptional fire safety system for the clients.

Founded in 2004 by Paul Seager, Commfire Ltd is an industry renowned fire alarm, fire extinguisher and emergency lighting installer, based in Andover, Hampshire, North Carolina, USA. Priding themselves on their high level of customer service, Commfire Ltd partners well with Eurotech Fire Systems through shared aims and values. Westcoast Ltd is a global distributor of major IT brands to resellers, retailers and office product dealers in the United Kingdom and abroad. Fire safety system to protect warehouse, assets A fire safety system was needed to protect their warehouse, staff and its assets. The challenge was providing a high level of safety in a site of such large scale. Location: Andover Installer: CommFire Services: Wireless Site Survey + Supply of all fire equipment Products: Euro-fi Wireless Range, Eurotech Intelligent Range, XP95 Intelligent Range, Advanced MX Panel, Beam Detection Beam detection After a previous visit to the site, it was understood that the system is of a greater scale than initially anticipated. From the visit, they had to adapt and figure out what would most conveniently cover the site, at the same time, as keeping it to a high standard and meeting the requirements of the fire risk assessment. The high ceilings and walls meant that beam detection would be required to cover the great distance and height along the site. Hybrid intelligent system installed A mixture of a wireless and wired systems, also known as a hybrid intelligent system, was installed To cover the site, they had to combine multiple products, in order to create the most efficient system possible. A mixture of a wireless and wired systems, also known as a hybrid intelligent system, was installed. High ceilings, along with the lengthy parts of the warehouse were covered using beam detection. The original fit-out consisted of XP95 devices. In order to limit additional costs and device removals, they used products from the Odyssey range and retained the original XP95 system. These communicate on the same protocol which allowed us to specifically reduce the costs for the customer and Westcoast’s warehouse. MXPro 5 panel uses Eurotech hybrid protocol Additional devices on a new system were put on, including an MXPro 5 panel communicating using Eurotech hybrid protocol. FireBeam detection is communicating to the Eurotech input module. The Advanced MXPro 5 panel provides great specification, so as to cover the number of devices on-site. There are four panels networking, three covering the Odyssey (Odyssey Fire Protection LLC) & XP95 systems, and one covering Eurotech & Euro-fi hybrid system, with the beam detection.

Teksfera is a globally renowned fire systems organization for the design, installation and maintenance of fire protection systems. Based in Dubai, United Arab Emirates, Teksfera has partnered with Eurotech to distribute the company’s exclusive Toccare Intelligent Touchscreen Fire Panel, the Evotech Intelligent Fire Panel, the Eurotech Intelligent fire system product range and Euro-fi wireless detection modules. Eurotech – Teksfera partnership Location: Dubai Installer: Teksfera Services: Supply of fire alarm panels and detection modules Products: Toccare Intelligent Touchscreen Panel, Evotech Intelligent Fire Panel, Eurotech Intelligent Range, Euro-Fi Wireless Detection Range Protecting life and property These Eurotech product ranges have achieved Civil Defense Approval, a requirement for any fire safety product purchased and installed in Dubai, UAE. Teksfera are also licensed with the Dubai Civil Defense, with their engineers undergoing the specific required training by the Civil Defense, for the installation and maintenance of fire safety systems. Since entering the Dubai market over 10 years ago, this exclusive partnership with Teksfera has allowed the further development of the Eurotech brand within the area, with the clear objective of protecting life and property, through the installation of robust and compliant life safety system. Teksfera has completed several recent installations, including Gleinbeigh, North South Logistics in DWC, Meraas Estates, Bait Al Yazi, Kinmere, Alkharbash and Al Qaize, Centurion Onyx, G+6 in Al Barsha South. Toccare panel integrated with Eurotech intelligent detectors These residential and commercial properties were protected with the new touchscreen Toccare panel These residential and commercial properties were protected with the new touchscreen Toccare panel, integrated with the Eurotech intelligent detector range. Requiring an easily accessible system control panel, the Toccare panel was also chosen to fit seamlessly with the high-end interior decor and to meet the required standards for fire safety. Teksfera also recently protected the Remran Masjid mosque. A fire detection system was required to ensure the fire safety of the building and occupants, especially during worship. A complete fire protection system using the Evotech Intelligent Panel integrated with the Eurotech Intelligent detection range was installed and commissioned. Fire systems installation experts Michelle Agius, the Managing Director of Eurotech, said “We’re very happy to partner with Teksfera in Dubai and assist them with their fire system installations in the region. We work with several companies globally, with each country having specific fire safety regulations that both products and installations need to meet. Michelle Agius adds, “Helping our clients ensure their customer’s premises are fully protected from the risk of fire, and compliant with the relevant legislation is at the heart of what Eurotech do.” For those looking for fire protection, whether it is a full system, a single detector, or a manual call point to add to an existing system, they can contact Eurotech, who will be more than happy to help them.