Download PDF version

Construction of Terminal 2 at Dublin Airport began in 2007 and opened in November 2010, the terminal is home to 19 departure gates and sees an average of 15 million passengers annually. Terminal 2 has around 9000 m2 of retail and catering outlets, 58 check-in desks, and provision for self-service and online check-in and baggage drop.

Services covered

  • Fire Alarm
  • Aspirating Fire Detection
  • Smoke Damper Control

Challenge

Consultants ARUP set protec the challenge to design develop, supply, install and commission a fire detection system to meet BS 5839. The system would have to be free of false alarms which at the time plagued the Terminal One building, while also finding cost-saving solutions when tailoring a package to suit Dublin Airport Authority’s needs.

The experience of Protec at other airports such as Manchester International secured the approval of the system from consulting engineers Arup.

Installing fire detection and alarm systems

61 Protec Algo-Tec digital addressable panels provided the new fire detection and alarm system at the airport

In total, 61 Protec Algo-Tec digital addressable panels provided the new fire detection and alarm system at the airport, with 53 acting as loop nodes and eight used for display purposes. The fire alarm panels manage and control over 10,000 6000PLUS multi-sensor detector/alert head units, 2,300 interfaces, and 500 manual call points.

The shops and catering units, offices, storerooms, and back-of-house areas all use 6000PLUS multi-sensor detector heads for fire detection and alert indication. The devices include software to check for smoke, heat, or carbon monoxide; the sensitivity pattern can be matched and adjusted at the panel to eliminate false alarms.

Aspirating detector system

The installation of an aspirating detection system in the second terminal at Dublin Airport avoided the numerous false alarms that the existing T1 suffered. The fire alarm system proposed by Protec was put on trial for a month in the old terminal and the sensitivity of the equipment was adjusted over that period, the technology then was applied to the Terminal 2 building.

The trial of the Cirrus aspirating detector system led to the installation of 120 units in the baggage handling areas and the loft above public areas.

Cost-saving

The significant cost saver for the project came from using some intelligent integrated smoke damper control interfaces

Protec is also used to prioritize innovative cost-saving interfaces. The most significant cost saver for the project came from using some intelligent integrated smoke damper control interfaces to use the wiring loop of the fire detection and alarm system for other purposes.

The system controlled all the cold smoke dampers for the terminal and removed the need to provide a separate control circuit for smoke dampers. The cost-saving was around €200,000.

Other interfaces link the fire detection and alarm system to the travellators, doors, escalators and lifts, air handling plant, sprinkler system, and smoke extractors, to close or shut them down in case of a fire.

Reducing false alarms

The order for Dublin Airport Protec was secured against fierce competition from other companies. John Elam, Major Projects Director, commented, “One of the decisive factors to appoint Protec as fire safety provider was the impressive demonstration of the cloud chamber technology used in the Cirrus air sampling detectors that reduced the false alarm potential plaguing T1’s existing baggage handling area, as this is a challenging environment to protect.”

The system allowed the airport authority to prioritize increased efficiency for the new terminal, and with increased efficiency, look toward less time wasted and more satisfied passengers as the goal.”

Aftercare

As the airport terminal is in Ireland, the client wanted a local contractor to service and maintains the site. Protec provided the fire alarm system with an open protocol installed; this gave the client the ability to employ their chosen maintenance team who continue to maintain and service the system as and when required.

Download PDF version Download PDF version

In case you missed it

Siemens Expands Fire Safety With Danfoss Acquisition
Siemens Expands Fire Safety With Danfoss Acquisition

Siemens Smart Infrastructure has completed the acquisition of Danfoss Fire Safety, a Denmark-based specialist in fire suppression technology. This strategic step will boost growth...

Specification And Installation: The Key To Effective Door Controls
Specification And Installation: The Key To Effective Door Controls

Safe and seamless movement in our built environment hinges on accurately specified and installed door hardware, explains Russell Marks, managing director of Boss Door Controls. Wi...

AEI Cables: Fire Safety And Building Compliance
AEI Cables: Fire Safety And Building Compliance

Many of the new requirements under the new Building Safety Act 2022 are still not understood by those making critical decisions in the fire safety supply chain, says cable supplier...

vfd