Hempel Launches Hempafire Pro 400 Optimized For 90 Minutes Of Cellulosic Fire Protection

Passive fire protection (PFP) coatings insulate steel during a fire, which extends the steel’s load-bearing capacity and gives valuable extra time for evacuation and emergency response.

Hempel’s Hempafire Pro intumescent PFP coatings are known for their low loadings, which can improve project efficiency.

cellulosic fire protection

Hempel has extended the range to include fire protection for 90 and 120 minutes

Hempel launched Hempafire Pro 315 in 2018, which provides 60 minutes of cellulosic fire protection and market-leading dry film thicknesses.

With the launch of Hempafire Pro 400 under BS 476 20/21, Hempel has extended the range to include fire protection for 90 and 120 minutes.

Reduces paint consumption, coats require

Hempel’s Group Product Manager, Cellulosic PFP, Roger Soler, says, “Our Hempafire Pro range of products has proven to be very attractive for applicators and specifiers. The exceptionally low loadings help to reduce both the total paint consumption and the number of coats required."

He adds, "This in turn means our intumescent coatings dry faster than similar coatings, which helps to speed up project completion times. Since we launched Hempafire Pro 315, our customers have asked for a coating with similar properties certified for a 90-minute fire duration. We developed Hempafire Pro 400 to meet this need.”

two versions available 

Hempel’s Hempafire Pro coatings can be used for all steel profile types for in-shop and on-site applications

With Hempel’s Hempafire Pro coatings, the same product can be used for all steel profile types for both in-shop and on-site applications. They can be used in exterior conditions and corrosion environments up to C4 according to ISO 12944.

Both Hempafire Pro 315 and Hempafire Pro 400 are available in two versions, standard and fast drying. Hempafire Pro 400 is launched in the UK and other countries where BS-476 is accepted.

Hempafire Pro range

The Hempafire Pro range at a glance:

• Two passive fire protection coatings: Hempafire Pro 315 optimized for 60 minutes of fire protection and Hempafire Pro 400 optimized for 90 minutes.
• Lower loadings significantly reduce paint consumption and help to improve drying times.
• Excellent aesthetic appearance when correctly applied.
• Can be used on all steel profiles.
• Excellent application properties designed with applicators in mind.
• Can be applied up to 1,600 microns DFT in one coat to minimize the number of coats required.