Fike has long been known for being a pioneer in service, support, and delivery in the fire protection industry. Fike’s state-of-the-art FCP fire alarm and communications system is revolutionary in its speed, intelligence, and flexibility. And the intelligent FCP control system is available for about the same price as standard fire alarm systems. Incredible Service, Superior Product — Unparalleled Value!
In addition, each FCP fire alarm system comes standard with the latest peer-to-peer technology. That means every fire alarm sensor and module can act as a peer, giving them the ability to communicate directly with the fire alarm panel, and with each other!
Accurate information
Every fire alarm device can also generate highly detailed, accurate information, such as the exact location of the fire, and modules can be programmed to perform process management tasks such as shutdowns, HVAC, voice evacuation systems, elevators, and Security / CCTV / Building management awareness.
FCP is compatible with Fike IDP detection devices and supports all of Fike’s detection systems, including Fike Video Analytics, air sampling, linear heat cables, flame detector cameras, and thermal imaging cameras.
FCP 300ECS and 2100ECS Emergency Communication Systems also include onboard voice evacuation functions to meet mass notification requirements as described in UL 2572.
FCP-75 Fire Alarm
FCP‐75 has a single signaling line circuit (SLC) loop for connecting up to 75 sensors
The FCP‐75 is an Intelligent Fire Alarm Control Communicator. The FCP‐75 has a single signaling line circuit (SLC) loop for connecting up to 75 sensors and 75 modules per loop (FIK IDP device protocol).
The overall point capacity is limited to a maximum of 150 points per panel. The FCP‐75 has the interconnection capability for up to 32 panels. The system has two modes of operation: multiple panels covering one larger building or multiple independent buildings.
To network panels together, use the FIK‐NIC network interface card. Copper wire or fiber optic cable panel connectivity can be used within the same networked system
FCP‐300 Fire Alarm
The FCP‐300 is an intelligent Fire Alarm Control Communicator. The FCP‐300 has a single‐line circuit (SLC) loop for connecting addressable detectors and modules. The SLC can support 159 sensors and 159 modules (FIK device protocol).
Additional SLC loops can be added using the FIK‐6815 SLC expander for FIK devices to increase the overall point capacity to a maximum of 300 points per panel.
The FCP‐300 has the interconnection capability for up to 32 panels. The system has two modes of operation: multiple panels covering one larger building or multiple independent buildings. To network panels together, use the FIK‐NIC network interface card. Copper wire or fiber optic cable panel connectivity can be used within the same networked system.
FCP‐300 ECS Fire Alarm
This state‐of‐the‐art fire alarm control panel contains one built‐in SLC
The FCP‐300ECS is an Intelligent fire alarm control panel (FACP) combined with an Emergency Communication System (ECS). When the ECS features are enabled, they are integrated with the control panel’s fire alarm and voice evacuation functions.
The FCP‐300ECS panel and accessories provide features to meet Mass Notification Systems’ requirements as described in UL 2572. This state‐of‐the‐art fire alarm control panel contains one built‐in signaling line circuit (SLC), which can support 159 FIK sensors and 159 FIK modules per loop.
Additional SLC loops can be added using the FIK‐6815 SLC expander for FIK devices to increase the overall point capacity to a maximum of 300 points per panel.
FCP‐2100 Fire Alarm
The FCP‐2100 is an intelligent Fire Alarm Control Communicator. The basic FCP‐2100 panel contains one built‐in signaling line circuit (SLC), which can support 159 sensors and 159 modules (FIK device protocol).
Additional SLC loops can be added using the model FIK‐6815 SLC expander to increase the overall point capacity to 2100 per panel. The FCP‐2100 has the interconnection capability for up to 32 panels. The system has two modes of operation: multiple panels covering one larger building or multiple independent buildings.
The RFCP‐2100 can be used in a networked system where at least one FCP‐2100 is in the system. It is the same as the FCP‐2100 without the display.
FCP‐2100 ECS / FCP‐2100 ECSHV
The FCP‐2100ECS panel provide features to meet Mass Notification Systems
The FCP‐2100ECS is an Intelligent Fire Alarm Control Panel (FACP) combined with an Emergency Communication System (ECS). When the ECS features are enabled, they are integrated with the control panel’s fire alarm and voice evacuation functions.
The FCP‐2100ECS panel and accessories provide features to meet Mass Notification Systems’ requirements as described in UL 2572. This state‐of‐the‐art fire alarm control panel contains one built‐in signaling line circuit (SLC), which can support 159 FIK sensors and 159 FIK modules per loop.
Additional SLC loops can be added using the FIK‐6815 SLC expander for FIK devices to increase the overall point capacity to a maximum of 2100 points per panel.
