Download PDF version

Many routine maintenance visits may have been delayed due to lockdown, in spite of the FIA helping fire professionals being classified as key workers. Many businesses remained closed and inaccessible during the lockdown. As buildings start to open up, the life safety systems installed in them will be in need of some attention in the form of routine inspections by a competent person.

Periodic inspection on a fire alarm system isn’t just checking a few call points and detectors, in fact, there is a great deal of emphasis on checking the building. BS 5839-1:2017 45.3 b) is all about the visual inspection of the building and the system installed, to check whether structural or occupancy changes have affected the system’s compliance with the recommendations of the standard.

Fire risk assessment

The fire risk assessment for the building should be reviewed if there has been a change in the building

This includes, but is not limited to, checking that call points and detectors are unobstructed, partitions have not been installed within 500 mm of any detector, and if any alterations cause additional components to be needed. For example, if COVID screens are hung from the ceiling within 300mm of the ceiling these would be treated as walls to the flow of smoke.

The fire risk assessment for the building should be reviewed if there has been a change in the building. Through putting up protective barriers, depending on the size extent of those screens and partitions, it could mean greater travel distances to an exit and call points, or barriers to smoke and heat.

Installing additional components

This does not give carte blanche to the maintenance company to go ahead and install additional components, it should involve a discussion with the customer in the first instance and the correct relevant advice issued - based on the recommendations within the standards.

FIA doesn’t know how long the COVID-19 protective measures will be in place, but they do know that a fire can happen at any time. Whether the system is intended for the protection of life, or property, they don’t want other protective measures to hinder the operation of these critical systems.

Download PDF version Download PDF version

In case you missed it

Siemens Expands Fire Safety With Danfoss Acquisition
Siemens Expands Fire Safety With Danfoss Acquisition

Siemens Smart Infrastructure has completed the acquisition of Danfoss Fire Safety, a Denmark-based specialist in fire suppression technology. This strategic step will boost growth...

Specification And Installation: The Key To Effective Door Controls
Specification And Installation: The Key To Effective Door Controls

Safe and seamless movement in our built environment hinges on accurately specified and installed door hardware, explains Russell Marks, managing director of Boss Door Controls. Wi...

AEI Cables: Fire Safety And Building Compliance
AEI Cables: Fire Safety And Building Compliance

Many of the new requirements under the new Building Safety Act 2022 are still not understood by those making critical decisions in the fire safety supply chain, says cable supplier...

vfd