Vietnam Fire Industry News

After 30 years of proven performance, the Dutch government has decided that the current mobile water supply systems featuring hydraulically driven submersible pumps used for long-distance water transport, need to be replaced. The systems supplied between 1988 and 1992 (also by Hytrans® Systems) and used in the event of large-scale disasters, will be replaced by "State of the art" systems, in which 4 new patents are applied. Mobile water transport systems Each participating Fire Depar...

Global HSE announces that it has achieved UKAS accredited IFC certification. Following successful office and site audits, it has been accepted onto the scheme for the installation and maintenance of Fire Rated Timber Doors. IFC Certification is a UKAS accredited and internationally recognized provider of high-quality, independent third-party certification. This accreditation is in line with our company values at Global. It ensures that certified products are installed in line with tested detail...

Over the last few weeks, Global is thrilled to have been partnering up with the team at Winkhaus to develop the skills and knowledge of composite fire doors. Winkhaus’ extensive expertise in their BM Trada Q Marked fire doors has been incredibly valuable, setting out the first steps in the journey with them. Global set its sights on the manufacturing and fabrication of its composite fire doors, looking to supply higher quality and safer doors to projects from their warehouse. With the hel...

Global HSE, a pioneer in fire engineering solutions, is one of the few companies to be named a preferred Hilti installer as part of the Hilti Accredited Firestop Specialty Contractor (HAFSC) program in the UK. Selection process Hilti undergoes a rigorous process of selecting contractors, who also need to be certified by a third party such as FIRAS or the Loss Prevention Certification Board (LPCB). This means that they work to agreed industry standards, employ trained operatives, and are subje...

With Britain in lockdown and government officials asking non-essential employees to work remotely, once fully occupied buildings and popular businesses are near vacant. To some, this may seem like an acceptable time to let fire protection take a back seat. Construction Industry There is confusion as to whether the government values construction as essential work and therefore if sites should remain open. In England, the government has recommended that construction should continue, as long as t...

The Atlanta, GA Fire Rescue Department uses GearGrid’s Standard Wall Mount Lockers to dry and store their turnout gear. The addition of secure doors provides complete locking capabilities so gear can be kept safe and protected. The department added Power Bars on top of each section of lockers, which provides electrical receptacles to individual locker openings so firefighters can conveniently charge equipment.

The Frisco, TX Fire Department stores their PPE with GearGrid’s Standard Wall Mount Lockers. The open-grid design promotes maximum air movement so gear can properly dry. The addition of Geargrid’s Furring System allows the lockers to be mounted away from the wall so they can remain in a continuous run. Apparel hooks and shelves can be adjusted in 3” increments so firefighters can customize their lockers to meet their exact storage needs.

The Rotterdam, NY Fire Department uses a variety of GearGrid’s innovative storage solutions to keep their PPE organized. The department uses our Standard Wall Mount Lockers to dry and store their turnout gear between uses. The addition of stainless steel hangers and hang bars make an ideal solution for properly drying PPE. The department also uses the 6’ Slinger Workstation as a convenient repair station with easy access to tools and equipment. GearGrid’s Mini Mobile Hose and...

The Highland Township, OH Fire Department uses GearGrid’s standard wall mount lockers to dry and organize their PPE between calls. The open grid design provides maximum air movement, which allows for a faster drying process. Each locker opening comes standard with two adjustable shelves and three heavy-duty apparel hooks. The Wall Mount Lockers are mounted above the floor for convenient, easy cleaning. In addition, the department chose to customize their lockers with a grey powd...

At the Tucson, AZ Fire Department they store their turnout gear with GearGrid’s standard wall mount and mobile lockers. The open grid design promotes maximum air movement, which minimizes odor build-up and allows gear to dry faster. Heavy-duty apparel hooks and shelves can be adjusted in 3” increments so firefighters can customize their lockers to meet their exact storage needs.

H2M Architects and Engineers designed this beautiful Setauket, NY Fire Station. The completed project turned out great and is a true representation of the dedication and service the firefighters provide to the community. In addition to all the incredible amenities included in the station design, firefighters can properly dry and store their PPE with GearGrid’s standard wall mount and mobile lockers. Each locker opening includes a stainless steel hang bar and hangers for quick drying betwe...

The Ventura County, CA Training Facility uses GearGrid’s 30” wide Standard Wall Mount Lockers for gear and equipment storage. Firefighters can customize their locker openings with adjustable shelves and apparel hooks that can be mounted at varying heights to meet individual storage needs. The larger locker openings allow firefighters to store more gear and equipment in one convenient location. The addition of secure doors allows for complete locking capabilities and added...

At the Boston, MA College Recreation Center they utilize wall mount equipment storage panels and shelves. The multi-functional systems allow the college to maximize space and store a variety of athletic equipment. In addition, Adjustable Wall Mount Shelves make the perfect solution that allows each shelf to be adjusted up or down to the height that meets the college’s exact storage needs. The storage possibilities are endless with these innovative GearGrid systems.

The Carrolton Fire Department in Ohio utilizes our state-of-the-art standard wall mount lockers. The multi-purpose locker system allows them to effortlessly maximize their space and store their gear efficiently. With adjustable shelves and apparel hooks, fire-fighters can customize their equipment lockers to meet their unique storage demands. The addition of stainless steel GearHangers, as well as HeavyHangers and GearGloves, allows for quick-drying in between calls while our Fire Bench is the...

Silverliner® Open State Cavity Barrier is developed to protect the voids between the outer facade and the inner construction element of the building. There are two versions of Silverliner® developed by FSi depending on the building requirements. Silverliner® Ventilated Open State Cavity Barrier allows for 25mm to 50mm gap to ensure movement of air and moisture within the building. The aluminum foil facing provides a class ‘O’ rating and excellent resistance to smoke....

The Columbus, OH Fire Department stores their PPE with GearGrid’s Standard Wall Mount and Mobile Lockers. For added organization, each locker opening includes a stainless steel hangbar and heavy-duty hangers so PPE can properly dry in preparation for the next call. Offering complete customization, firefighters are able to organize their gear just the way they choose.

The Miami-Dade, FL Fire Department keeps their turnout gear secure with GearGrid’s Standard Wall Mount Lockers. Their secure doors provide complete locking capabilities so gear can be protected between uses. The open grid design promotes maximum air movement, which allows turnout gear to dry faster. In addition, the department uses the Heavy-Duty Mobile Hose and Cylinder System to store the hose and other equipment at the station.

The Minneapolis-Saint Paul, MN International Airport uses several GearGrid systems for storing their gear and equipment. The airport uses their Heavy-Duty Mobile Hose and Cylinder System to store their fire extinguishers. These systems are completely modular, so they can be built to store a variety of equipment. For added customization, the airport chose to have the units powder coated red and green. Since GearGrid’s Heavy-Duty Mobile Hose and Cylinder System is so modular, they also use...

The Indiana – Kentucky, IN Electric Corporation, chose to include GearGrid’s innovative Station Wagon at a coal fire power plant. The mobile storage solution is ideal for transporting cylinders, hose, and related equipment within the plant. They chose to customize the Station Wagon with a six-place cylinder carrier and an A-Frame with secure, attachable tool holders. Specifically, the Station Wagon is outfitted with six SCBA cylinders, two SCBA air packs, two spare Scott masks, a 10...

The Decorah, IA Volunteer Fire Department uses GearGrid’s Standard Wall Mount Lockers in their Technical Rescue Trailer to conveniently store and transport gear. By adding additional flat shelves to each locker opening, the department can take full advantage of the open space for storing their equipment. Each shelf is adjustable in 3” height increments, so they can be mounted to meet the department’s exact storage needs. Even with the limited amount of storage space in the tra...

GearGrid is pleased to announce they will be attending the 2019 Athletic Equipment Managers Association Show June 3rd – 5th at the Indianapolis Convention Center in Indianapolis, IN. The Athletic Equipment Managers Association Show provides a great opportunity for GearGrid and attendees to discuss the storage challenges athletic facilities are currently facing. Individual athletic facilities GearGrid is dedicated to listening to these challenges and working with its customers to find th...

Seattle, WA Station #32 stores their turnout gear with GearGrid’s Standard Wall Mount and Mobile Lockers. The station chose to include a stainless steel hangbar and hangers within each locker opening to ensure PPE properly dries between calls. The station also uses GearGrid’s Miami System to store their cylinders in one convenient location. The system offers unlimited placement flexibility for easy transportation around the station and convenient access to gear.

Portland, OR Fire and Rescue uses GearGrid’s standard wall mount lockers to dry and store their turnout gear. The systems are completely customizable so firefighters are able to organize them just the way they choose. Heavy-duty apparel hooks provide a convenient solution for hanging and drying PPE. The addition of top-side storage shelves allows the department to maximize storage space by placing gear and equipment on top of the lockers.

Utilizing FSi’s extensive fire resistance testing evidence performed by European, Australian, and other recognized international fire test standards and Certification schemes, Element Warrington Fire has been commissioned to produce a bespoke approval, specific to the installation of plastic pipes passing through profiled steel composite decks, Warrington Fire Report WF 4242912. The system is unique within the industry as there is currently no formal mechanism to test and certificate the...

With the New Year underway, Royal Berkshire Fire and Rescue Service (RBFRS) is supporting this month’s Fire Kills smoke alarm purchasing campaign, urging households across the County to make sure they fit smoke alarms on every level of their home. Many people see January as an opportunity for a fresh start, making it the perfect time to ensure prioritizing fire safety in 2021.  The latest fire statistics reveal that one smoke alarm may not be enough to provide the best chance of esca...

Saab (Saab AB) has shipped its third aft airframe section for use in the T-7A Red Hawk flight test program for the United States Air Force. The shipment on September 10, 2021 was from Saab’s Linköping site in Sweden to Boeing, in St. Louis, Missouri, USA and arrived there a few days later. The production and shipment of this aft airframe section is the latest milestone in Saab’s contribution to the Engineering and Manufacturing Development (EMD) phase of the T-7A Red Hawk train...

Inflexion is pleased to announce it has made a majority investment in Detectortesters (No Climb Products Ltd.), the foremost global manufacturer of fire detector testing equipment. The investment is being made by Inflexion Buyout Fund V. Founded in 1965, Detectortesters designs and produces solutions that enable testing of smoke, heat, and carbon monoxide fire detectors. With a worldwide customer base, consisting mainly of field service engineers, the business exports its products to over 130 c...

FirePro UK, FirePro’s Master Distributor in the UK and Ireland, participated in the Fire Safety Event at the National Exhibition Centre (NEC) in Birmingham, between 7th and 9th September 2021.  FSE, is one of the largest Fire Safety events in the UK that attracts a dedicated and focused network of buyers responsible for maintaining the very highest standards of fire safety management.  Event Review Exhibitors showcased their latest products, technologies, and solutio...

Safety helmets are essential in almost all industries. Be it mining, construction, forestry, or any other sector, a safety helmet is one of the most important parts of the personal protective kit for the workforce. Over the years, with the progress in technology, hard hats have become more advanced and provide better protection. However, not all types of safety helmets are suitable for every job. safety helmets Different types of safety helmets have different properties. And it is important t...

The importance of wearing a safety helmet should not be neglected, especially if working on a construction site, mining industry or anywhere that involves heavy machinery and objects. Safety helmets are designed to protect head from any fatal injuries, like shock impacts, electric exposure, anything heavy falling on head, untoward impacts, etc.  According to the numbers, the most common causes of head injuries are heavy or sharp objects falling on head. The consequences of such injuries ma...