E2S News

The new Haz. Loc. D2xB1LD3 LED beacon from E2S Warning Signals generates an effective candela rating of 82.1 cd under UL1971 test conditions, making it the brightest UL1971 compliant visual emergency signalling device from any manufacturer suitable for use as part of a public mode fire alarm installation for hazardous areas. Haz. Loc. D2xB1LD3 LED beacon The NFPA 72 compliant 20ms high intensity pulse generates light output equivalent in perception to a traditional strobe, but with ultra-low c...

The latest addition to the E2S Warning Signals D1x family are the D1xB2 beacons, which offer global approvals with SIL1 and SIL 2 compliance. Light sources are available as either Xenon or LED. Strobes are offered in 5, 10, 15 or 21 Joule Xenon variants with four flash rate options and are approved for private mode fire alarm use to UL1638. The high-power LED array features a steady mode for status applications, five flash patterns and three remotely selectable alarm stages/channels. UL/cUL and...

E2S Warning Signals, the world’s independent signalling manufacturer, is featuring the latest product introductions from its extensive range of alarm horn sounders, beacons, loudspeakers and call points for fire and gas warning systems in offshore and onshore hazardous area installations. On Stand 8620 at ADIPEC Abu Dhabi, 12 – 15 November 2018, the booth will feature the D2x family beacons and combi units, UL464 and UL1638/UL1971 approved for public mode fire alarm systems. Also fe...

The extensive E2S product portfolio includes high output devices to suit noisy or brightly lit environments and wide area coverage E2S Warning Signals, the independent manufacturer of audible and visual warning devices, will be on Booth 1E34 in Hall 1.0 at Security Essen, 27 to 29 September 2016, showing a selection of products from its comprehensive range of sounders, loudspeakers, beacons, combined AV units, plus push button and break glass manual call points suitable...

NFPA delivers information and knowledge through over 300 consensus codes and standards E2S Warning Signals is now a member of the National Fire Protection Association (NFPA). E2S has a dedicated sales support & distribution facility in Houston, TX to serve the North American market, designs and manufactures hi-performance signalling equipment that features in world class projects. Amongst its extensive globally certified product portfolio, E2S offers UL and cULs approved H...

The certification is applicable over 50 different E2S explosion proof, intrinsically safe & general industrial product E2S Warning Signals, the world’s leading independent manufacturer of audible and visual warning devices, recently renewed its Russian Fire Certificate applying to a series of popular products. The extended Certificate of Conformity to GOST 53325 -2012 issued by Fire Safety Technologies, the independent Russian Approval authority, is valid until...

E2S Central Europe Sales Manager Joachim Ebert will be heading up the company’s presence at the event Joachim Ebert, Central Europe Sales Manager for E2S Warning Signals, the world’s leading independent manufacturer of audible and visual warning signals, will be heading up the company’s presence at ACHEMA on Stand G86 in Hall 11.1. The booth will feature existing, updated and new E2S products that are widely specified in chemical industry and process control...

E2S’s full range of explosion proof, safe & marine approved warning devices will be available for the exhibit E2S Warning Signals, manufacturer of audible and visible warning devices, design and manufacture a large number of different sounders, beacons and call points for use in onshore and offshore hazardous areas. At the end of March, the company will be showcasing its product ranges at two exhibitions some 8000 km apart. From 26 – 28 March at the China...

The new SIL 2 technology in the E2S horns means that the functionality can be remotely checked Safety Integrity Level, SIL, is a measure of safety system performance expressed in terms of probability of failure on demand (PFD). In the oil and gas industry, particularly in the fire and gas detection systems where safety integrity is critical, SIL 2 is becoming a common standard across systems. To meet the growing demand in the oil & gas industry, E2S Warning Signals, the le...

The guide offers advice regarding the advantages and disadvantages of Zener barriers and isolation interfaces E2S has published a complete guide for easy specification and installation for their range of intrinsically safe sounders, beacons and combination devices. The guide is based on the ATEX certification but in general, the guidelines apply to other intrinsic safety standards including NEC and IECEx. Focusing on interface selection, the guide offers advice regarding the...

The certifications replace the GOST-R and Ex GOST-R national Russian certification system E2S are pleased to announce the attainment of these new certifications for products from their fire & industrial, explosion proof and wide area disaster notification portfolios. The new TR CU Declaration of Conformity certifies compliance to the new, harmonised Technical Regulations of the Eurasian Economic Community (Russia, Belarus and Kazakhstan) and fulfillment of safety requireme...

The significant increase will provide system integrators and end clients peace of mind regarding their investment in E2S For greater peace of mind, signalling products for hazardous areas, fire and industrial applications and wide area disaster warning are now available with a five-year warranty. Priding itself on stringent quality procedures being applied throughout the product manufacturing process, the company has backed up this claim by extending its product warranty...