C. Miesen GmbH & Co. KG News

For Rosenbauer Saudi Arabia, C. Miesen was recently able to realize an order for a total of 13 ambulance box bodies for the Ford F350 chassis. An ambulance vehicle as a prototype was completely manufactured at the production site in Bonn. The other 12 ambulance box bodies were delivered by C. Miesen to Saudi Arabia as so-called SKD kits (semi-knock-down) for final assembly. Thus, the final "marriage" of the ambulance box modules with the chassis, as well as the completion for the domestic marke...

C. Miesen GmbH & Co. KG were able to manufacture two new intensive transport trolleys for their Dutch customer RAVU Ambulancezorg Utrecht. The basic vehicle for these special vehicles is a chassis based on a Mercedes-Benz Sprinter 519 CDI with a wheelbase of 4,325 mm. The expansion of the two state-of-the-art special vehicles is tailored to the extreme requirements of laying intensively required patients. Features Intensive care patients can be safely and comfortably loaded and unloaded...

For the Corps grand-ducal d'incendie et de secours (CGDIS) Luxembourg, C. Miesen was able to implement a total of 10 new emergency medical vehicles based on Mercedes-Benz GLE 350 D 4Matic. This emergency vehicle impresses with an output of 200 kW (272 hp), an all-wheel-drive (4 × 4), and a 9G-TRONIC automatic transmission. But numerous equipment highlights can also be seen and make this emergency doctor vehicle the perfect helper for all emergency trips. Features With the conversion,...

A Mercedes-Benz Sprinter serves as the basis for these tailor-made emergency vehicles. Thanks to the four-wheel drive, it is safe to travel even in rough terrain. Features In addition to the integrated LED special signal technology at the front and rear, LED front flashers in the radiator grille and LED cross-breeding flashers to ensure the best possible protection of the operating events even in poor visibility and darkness. The warning light system is reinforced by a self-acting light hor...

C. Miesen GmbH & Co. KG were able to manufacture a total of ten new emergency medical vehicles to strengthen their customer's fleet in the future Ambulance Syd in Denmark. A Mercedes-Benz GLE serves as the basis for the emergency medical vehicles, which always transports the crew safely from A to B due to innovative driving assistance and safety systems. Highlights Numerous equipment highlights can be seen that make these emergency medical vehicles the perfect helper for all emergency jou...

C. Miesen Gmbh & Co. KG manufactures a new ambulance with an integrated box body that was delivered to La Chaux de Fonds in western Switzerland in the canton of Neuchâtel last week. A Mercedes-Benz Sprinter 519 CDI 4x4 chassis with a gross vehicle weight of 5 tons, a wheelbase of 3,665 millimeters, and an engine output of up to 140 kW (190 hp) serves as the basis for this tailor-made emergency vehicle. Features Due to extensive special LED-based signaling technology, this vehicle...

C. Miesen Gmbh & Co. KG handed over a very special project to the shipping company for the end customer in Macau. Features A MAN TGE panel van serves as the basis for this tailor-made ambulance. The right-hand-drive has a wheelbase of 3,640 mm and a high roof. The ambulance vehicle is equipped with an integrated LED special signal technology with red flashing lights at the front and rear. The warning light system on the side and at the rear is reinforced by large red LED flashers of t...

C. Miesen GmbH & Co. KG were able to manufacture a total of five new ambulances to strengthen the customer's fleet in the future Ambulance Syd in Denmark. The basis for the ambulance vehicles is a Mercedes-Benz Sprinter 416 CDI, wheelbase 3,665 mm, with original high roof, all-round glazing, and an additional left sliding door. Features The equipment of these vehicles offers some highlights that make daily work easier and safer for the emergency services:  In addition to the integ...

C. Miesen GmbH & Co. KG were able to manufacture and deliver the first five of a total of 12 identical ambulances with box body construction to the Swiss "Rescue St. Gallen".A Mercedes-Benz Sprinter 4x4 chassis, with a wheelbase of 3,665 millimeters, serves as the basis for these tailor-made emergency vehicles. Features Due to an extensive special signal technology based on LED, these vehicles are perceived and detected at an early stage in road traffic. Numerous external access flaps p...

New technology and strategies are urgently required if rescue services are to meet the enormous challenges they encounter in the modern world. Demographic change, the need for well-trained specialist personnel and responding to major incidents and disasters are just some of the keynote themes that demand answers. At INTERSCHUTZ 2020 manufacturers, suppliers, rescue services and training institutes will present their solutions and ideas for future-fit rescue services. At the same time, INTERSCHU...