Kussmaul Electronics Co. Inc. 091-96-12 Load Manager 1H

Technical Specification

Features:
  • Make: Kussmaul Electronics Co. Inc.
  • Model code: 091-96-12
  • Type: LOAD MANAGER 1H
Additional info:

Sheds 1 Load 30 Amp Relay Contact Rating 1.4 Volt Differential Between Relay Pull-In and Drop-Out Monitors 12 Volt System and Detects Low Voltage Relay Operates to Interrupt Load May Operate Remote Indicator Light Automatic Reset when Voltage Rises Load Management - Yes Loads - 1 Input - 12 Vdc Warranty - 3 Years Weight - .25 Lbs Indicators - Green - Normal , Red - Under Voltage Relay Contacts - 30 Amps Set Point - 12.0 Volts Adjustable Range - 10.5 To 13 Volts Hysteresis - 1.4 Volts The Load Manager 1H is a small economical assembly that monitors a D.C. voltage, and operates a relay when the voltage drops below its set point. This unit is unique in that a special high hysteresis feature maintains the relay in the energized condition, even if the voltage rises again. This prevents the load that has been shed, from being reenergized, until the sensed voltage rises more than 1.4 volts above the set point. Voltage set point and hysteresis are field adjustable. LED indicators are provided adjacent to the terminal strip, to indicate whether the system voltage is normal, or that the voltage has dropped below the set point. Installation instructions that are provided with each unit, contain a procedure for readjusting the under voltage set point.

Read more
Make Kussmaul Electronics Co. Inc.
Manufacturer Kussmaul Electronics Co. Inc.
Category Fire and Rescue>Apparatus and Equipment Accessories
Model code 091-96-12
Type LOAD MANAGER 1H
Additional info
  • Sheds 1 Load
  • 30 Amp Relay Contact Rating
  • 1.4 Volt Differential Between Relay Pull-In and Drop-Out
  • Monitors 12 Volt System and Detects Low Voltage
  • Relay Operates to Interrupt Load
  • May Operate Remote Indicator Light
  • Automatic Reset when Voltage Rises
  • Load Management - Yes
  • Loads - 1
  • Input - 12 Vdc
  • Warranty - 3 Years
  • Weight - .25 Lbs
  • Indicators - Green - Normal , Red - Under Voltage
  • Relay Contacts - 30 Amps
  • Set Point - 12.0 Volts
  • Adjustable Range - 10.5 To 13 Volts
  • Hysteresis - 1.4 Volts

The Load Manager 1H is a small economical assembly that monitors a D.C. voltage, and operates a relay when the voltage drops below its set point. This unit is unique in that a special high hysteresis feature maintains the relay in the energized condition, even if the voltage rises again. This prevents the load that has been shed, from being reenergized, until the sensed voltage rises more than 1.4 volts above the set point. Voltage set point and hysteresis are field adjustable. LED indicators are provided adjacent to the terminal strip, to indicate whether the system voltage is normal, or that the voltage has dropped below the set point. Installation instructions that are provided with each unit, contain a procedure for readjusting the under voltage set point.

Download PDF version Download PDF version
vfd