Cervinka DF008 ECO FIRE FIGHTING FOAM DIMILEX® A

Technical Specification

Features:
  • Make: Cervinka
  • Model code: DF008
  • Type: DIMILEX® A
Additional info:

DimiLex® class A is synthetic foam based on surfactant. The combination of hydrocarbon surfactants, stabilizers are used for extinguishing fires class A.DimiLex® class A is non-toxic and biodegradable, and do not need special forwarding labeling. Certified according to EN 1568 In accordance with the world standards High efficiency Positive environmental impact DimiLex® Class A has perfect extinguishing properties for Class A fires by providing deep penetration of water into the burning material. At low concentrations it is highly effective for fighting forest fires.DimiLex® Class A can be used with both aspirating and non-aspirating discharge devices. DimiLex® Class A can be used with different types of nozzles. It is compatible with all fire extinguishing powderClass A, B, C and D.DimiLex® Class A may be used both as a wetting agent and as agent for extinguishing fires class A. Effective percentage of forest fires is from 0.1% to 1.0%.   Concentration: 0,1 + 1,0 % Density at 20°C: 1.04 +/- 0,02 g/ml pH: 6.5 ÷ 8.5 Viscosity at 20°С: < 20 mm2 /s Suspended sediment (v/v): none Storage temperature: up to + 50°С Expansion: ≤ 20        

Read more
Make Cervinka
Manufacturer Cervinka - Czech Republic s.r.o.
Category Fire Protection>Fire Suppression System Accessories
Model code DF008
Type DIMILEX® A
Additional info

DimiLex® class A is synthetic foam based on surfactant. The combination of hydrocarbon surfactants, stabilizers are used for extinguishing fires class A.
DimiLex® class A is non-toxic and biodegradable, and do not need special forwarding labeling.

  • Certified according to EN 1568
  • In accordance with the world standards
  • High efficiency
  • Positive environmental impact

DimiLex® Class A has perfect extinguishing properties for Class A fires by providing deep penetration of water into the burning material. At low concentrations it is highly effective for fighting forest fires.
DimiLex® Class A can be used with both aspirating and non-aspirating discharge devices. DimiLex® Class A can be used with different types of nozzles. It is compatible with all fire extinguishing powderClass A, B, C and D.
DimiLex® Class A may be used both as a wetting agent and as agent for extinguishing fires class A. Effective percentage of forest fires is from 0.1% to 1.0%.

 

Concentration: 0,1 + 1,0 %

Density at 20°C: 1.04 +/- 0,02 g/ml

pH: 6.5 ÷ 8.5

Viscosity at 20°С: < 20 mm/s

Suspended sediment (v/v): none

Storage temperature: up to + 50°С

Expansion: ≤ 20

 

 

 

 

Download PDF version Download PDF version
vfd