Ziamatic LAS-XT-775 Ladder Access System – Extend Down

Technical Specification

Features:
  • Make: Ziamatic
  • Model code: LAS-XT-775
Additional info:

Combines the popular, time-tested LAS design with a new, patented cable and pulley system capable of raising and lowering ladders an amazing 43 inches for quick, safe, and easy retrieval. 12 inches more than our standard systems. A great choice for apparatus with high shelves or departments with shorter personnel.   Features: – Lowers ladders 43 inches from the stored position (10 more than our standard model) to a convenient height for safe & easy retrieval, reducing risk of strains and other common injuries. – Powered by two self-contained 12V hydraulic actuators with a maximum load of 300 lb. Hydraulic actuators provide a more parallel, even raising & lowering motion. – Ladders remain close to the apparatus when lowered for better operation in tight spaces. – Castings are solid, heavy-duty yet lightweight powder-coated cast aluminum. Can be mounted to a horizontal and/or vertical surface. – A spring-loaded handle helps keeps ladders firmly secured to the unit. – NFPA compliant. A Flashing Light Kit provides a visual signal when the system is out of the stored position. An optional Audio/Visual Alarm is also available (see Model AVA).   An optional locking system is recommended when consistently dealing with rough terrain, such as railroad tracks, or when mounting a hard sleeve to the unit. See Models LLAS-MLS and LLAS-ELS. To mount a hard sleeve to the unit, order one Model LAS-FLB, one Model HSS-TMC, one Model HSS-SAT-10, and one Model HSS-TMH. To lower pike poles, folding ladders, a hard sleeve, and other accessories with your ladders, order the Model LAS-XT-AB Accessory Bracket. Note: In some cases, 1-1/2″ spacers will be required for proper mounting, see Model 3097-250-000.   Systems Available: Model LAS-XT: Basic Unit Model LAS-XT-775: Complete Unit with 7-3/4″ Ladder Support Model LAS-XT-975: Complete Unit with 9-3/4″ Ladder Support Model LAS-XT-1200: Complete Unit with 12″ Ladder Support   Ordering Your LAS-XT System: When ordering, please be prepared with the following information: 1.) Manufacturer of ladders to be mounted 2.) Model numbers of ladders to be mounted 3.) Length of each ladder 4.) Fire department name, city, and state (for unit registration)  

Make Ziamatic
Manufacturer Ziamatic Corp.
Model code LAS-XT-775
Additional info
  • Combines the popular, time-tested LAS design with a new, patented cable and pulley system capable of raising and lowering ladders an amazing 43 inches for quick, safe, and easy retrieval. 12 inches more than our standard systems.

    A great choice for apparatus with high shelves or departments with shorter personnel.

     

    Features:

    – Lowers ladders 43 inches from the stored position (10 more than our standard model) to a convenient height for safe & easy retrieval, reducing risk of strains and other common injuries.

    – Powered by two self-contained 12V hydraulic actuators with a maximum load of 300 lb. Hydraulic actuators provide a more parallel, even raising & lowering motion.

    – Ladders remain close to the apparatus when lowered for better operation in tight spaces.

    – Castings are solid, heavy-duty yet lightweight powder-coated cast aluminum. Can be mounted to a horizontal and/or vertical surface.

    – A spring-loaded handle helps keeps ladders firmly secured to the unit.

    – NFPA compliant. A Flashing Light Kit provides a visual signal when the system is out of the stored position. An optional Audio/Visual Alarm is also available (see Model AVA).

     

    An optional locking system is recommended when consistently dealing with rough terrain, such as railroad tracks, or when mounting a hard sleeve to the unit. See Models LLAS-MLS and LLAS-ELS.

    To mount a hard sleeve to the unit, order one Model LAS-FLB, one Model HSS-TMC, one Model HSS-SAT-10, and one Model HSS-TMH.

    To lower pike poles, folding ladders, a hard sleeve, and other accessories with your ladders, order the Model LAS-XT-AB Accessory Bracket.

    Note: In some cases, 1-1/2″ spacers will be required for proper mounting, see Model 3097-250-000.

     

    Systems Available:

    Model LAS-XT: Basic Unit

    Model LAS-XT-775: Complete Unit with 7-3/4″ Ladder Support

    Model LAS-XT-975: Complete Unit with 9-3/4″ Ladder Support

    Model LAS-XT-1200: Complete Unit with 12″ Ladder Support

     

    Ordering Your LAS-XT System:

    When ordering, please be prepared with the following information:

    1.) Manufacturer of ladders to be mounted

    2.) Model numbers of ladders to be mounted

    3.) Length of each ladder

    4.) Fire department name, city, and state (for unit registration)