Task Force Tips UM12-NF

Technical Specification

Task Force Tips
Features:
  • Make: Task Force Tips
  • Model code: UM12-NF
  • Application Method: Portable
  • Hazard: Class A
  • Type: Class A
Additional info:

PRO/pak Portable Foam System. High impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve/carrying handle. Selectable discharge velocity with inlet pressures between 40 and 500 PSI (3 to 34 bar). The nominal flow is 12 gpm at 100 psi (45 l/min @ 7 bar). Shoulder strap is included for extended operations. Supplied with three different quick connect nozzles, a discharge hose and a cap. The straight-stream nozzle gives maximum reach and penetration. The low-expansion nozzle works well with Class A and B foam solutions where reach is more important than expansion ratio. Dimensions: 14.25" L x 11" W x 18" H.  

Make Task Force Tips
Manufacturer Task Force Tips Inc.
Model code UM12-NF
Application Method Portable
Hazard Class A
Type Class A
Flow Rate (GPM) < 30
Additional info

PRO/pak Portable Foam System. High impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve/carrying handle. Selectable discharge velocity with inlet pressures between 40 and 500 PSI (3 to 34 bar). The nominal flow is 12 gpm at 100 psi (45 l/min @ 7 bar). Shoulder strap is included for extended operations. Supplied with three different quick connect nozzles, a discharge hose and a cap. The straight-stream nozzle gives maximum reach and penetration. The low-expansion nozzle works well with Class A and B foam solutions where reach is more important than expansion ratio. Dimensions: 14.25" L x 11" W x 18" H.