Prism XP-702S

Technical Specification

Features:
  • Make: Prism
  • Model code: XP-702S
  • Type: Gas
Additional info:

The XP-702S opens up a new concept of gas leakage detection. It easily and quickly locates leaks in pipes and fittings where conventional methods such as soap solutions are impracticable. The sensitivity is high enough to test above ground for leaks in underground pipelines. It affords considerable reduction in operator fatigue, labour time and cost. It can not only detect most combustible gases and vapours (including catalyst poisoning gases such as hydrogen sulphide, methyl chloride and methyl bromide) but also the non-combustible Freon R-22. Features: Compact and Lightweight Fast and convenient Simple to operate Long sensor life Rugged construction Automatic pump Specifications: Detection Principle: Two terminal type sintered semiconductor gas sensor with very low power drain Minimum Detectable Leak Rate: 3.3 X 10-5 atm. CC/sec* Minimum Detectable Concentration: 10ppm or less of gas used for calibration Alarm style: Intermittent tone and flashing lamp with frequency proportional to gas concentration Response Velocity: Max. 3 seconds Power Supply: 4 X UM-3 (AA Size) cells Battery life: 3 hours for continuous use with standard dry cell batteries Intrinsic Safety: Id2G3 Certificate no. 32184 (intrinsic safety is not certified if instrument is calibrated for Ammonia) Operation Temperature: -20° C to + 50° C (-4° F to +122° F) Dimensions: 155mm X 68mm X 32mm (6.2" X 2.7" X 1.3") Weight: 400g (14 OZ.)

Make Prism
Manufacturer Prism Gas Detection Pvt Ltd
Model code XP-702S
Type Gas
Additional info

The XP-702S opens up a new concept of gas leakage detection. It easily and quickly locates leaks in pipes and fittings where conventional methods such as soap solutions are impracticable. The sensitivity is high enough to test above ground for leaks in underground pipelines. It affords considerable reduction in operator fatigue, labour time and cost.

It can not only detect most combustible gases and vapours (including catalyst poisoning gases such as hydrogen sulphide, methyl chloride and methyl bromide) but also the non-combustible Freon R-22.

Features:

  • Compact and Lightweight
  • Fast and convenient
  • Simple to operate
  • Long sensor life
  • Rugged construction
  • Automatic pump

Specifications:

  • Detection Principle: Two terminal type sintered semiconductor gas sensor with very low power drain
  • Minimum Detectable Leak Rate: 3.3 X 10-5 atm. CC/sec*
  • Minimum Detectable Concentration: 10ppm or less of gas used for calibration
  • Alarm style: Intermittent tone and flashing lamp with frequency proportional to gas concentration
  • Response Velocity: Max. 3 seconds
  • Power Supply: 4 X UM-3 (AA Size) cells
  • Battery life: 3 hours for continuous use with standard dry cell batteries
  • Intrinsic Safety: Id2G3 Certificate no. 32184 (intrinsic safety is not certified if instrument is calibrated for Ammonia)
  • Operation Temperature: -20° C to + 50° C (-4° F to +122° F)
  • Dimensions: 155mm X 68mm X 32mm (6.2" X 2.7" X 1.3")
  • Weight: 400g (14 OZ.)