1 May 2021
Honeywell is launching a completely new series of conventional signal transmitters according to EN54-3 and EN54-23.
When using ENScape signal transmitters, one will get a better and visual warning in the event of a fire alarm. Safety will be increased for the hearing impaired and for everyone in areas where there is a lot of noise.
With innovative electronics and advanced optics, these signal transmitters provide a high light output with a low current draw.
Acoustic signal transmitters
- EN54-3 approved
- 32 tones, also including a simulated bell sound
- 100dB cut (tone dependent), maximum 107dB
- Adjustable volume, high or medium
- Two-stage warning when required
- Low power consumption
- 12v and 24v operation optical signal transmitters
- Godkjent by EN54-23, W & C class
- Synchronized flashing frequency for EN54-23 standard
- Frequency 0.5Hz
- White LED
- Clear glass / lens
- "Soft start" reducing power consumption at the start
Acoustic/optical e signalers
- Godkjent by EN54-23, C, W & O class
- 32 tone settings, incl. A clock tone
- Sound, medium or high
- Synchronized flashing frequency
- Both white and red LEDs are used in these models
- “Soft Start "Reduces power draw at start-up