Kussmaul Electronics Co. Inc. 091-128-12E-40 ODY Charger

Technical Specification

Features:
  • Make: Kussmaul Electronics Co. Inc.
  • Model code: 091-128-12E-40
Additional info:

40A, 12V charge rating Automatically charges battery 3 step charging - Bulk - 14.7 Volts, Absorption - 14.7 Volts, Float - 13.6 Volts Current limited output Ideal for daily battery charging No water boil off 3 year warranty The ODY Charger is a compact, completely automatic battery charger designed specifically for recharging Odyssey AGM batteries. Of rugged construction, the charger is made to withstand the shock and vibration encountered in vehicle mounted equipment. Utilizing the 3 step charging cycle and the protocol required by the Odyssey AGM batteries, this charger will rapidly recharge the battery. Initially the discharged battery is recharged at a constant current (bulk charge). As the terminal voltage rises, the controller switches to a constant voltage (absorption or finish charge) until the output current drops below a predetermined point. At this point the output voltage switches to the float level and the battery is maintained. An 8 hour timer is provided to automatically switch the charger to the float mode. Five LED indicators are provided to indicate the various states in which the charger is operating.

Make Kussmaul Electronics Co. Inc.
Manufacturer Kussmaul Electronics Co. Inc.
Model code 091-128-12E-40
Additional info
  • 40A, 12V charge rating
  • Automatically charges battery
  • 3 step charging - Bulk - 14.7 Volts, Absorption - 14.7 Volts, Float - 13.6 Volts
  • Current limited output
  • Ideal for daily battery charging
  • No water boil off
  • 3 year warranty

The ODY Charger is a compact, completely automatic battery charger designed specifically for recharging Odyssey AGM batteries. Of rugged construction, the charger is made to withstand the shock and vibration encountered in vehicle mounted equipment. Utilizing the 3 step charging cycle and the protocol required by the Odyssey AGM batteries, this charger will rapidly recharge the battery. Initially the discharged battery is recharged at a constant current (bulk charge). As the terminal voltage rises, the controller switches to a constant voltage (absorption or finish charge) until the output current drops below a predetermined point. At this point the output voltage switches to the float level and the battery is maintained. An 8 hour timer is provided to automatically switch the charger to the float mode.

Five LED indicators are provided to indicate the various states in which the charger is operating.