Kidde Fire Systems KN-COB-LP2 Battery Operated Carbon Monoxide Alarm

Technical Specification

Features:
  • Make: Kidde Fire Systems
  • Model code: KN-COB-LP2
  • Type: Gas
Additional info:

Battery Operated (2AA’s included) – Provides protection during power outage. Low Battery Hush - Silences low battery chirp warning for up to 12 hours in order to maintain protection without having to replace the batteries at an inconvenient time. Battery Lockout System – Deters covering battery compartment without installation of batteries. Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every ten seconds. Slide-out Battery Door Cover – Gives immediate access to batteries. Test/Reset Button – Tests the unit for proper operation Resets the Carbon Monoxide Alarm Low Battery Signal – Alerts user when the battery needs to be replaced. Green LED – Flashes every 60 seconds to indicate the unit is operating properly. The green LED will also flash before a CO reading is taken and when any button is pressed. Red LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.

Make Kidde Fire Systems
Manufacturer Kidde Fire Systems
Model code KN-COB-LP2
Type Gas
Additional info
  • Battery Operated (2AA’s included) – Provides protection during power outage.
  • Low Battery Hush - Silences low battery chirp warning for up to 12 hours in order to maintain protection without having to replace the batteries at an inconvenient time.
  • Battery Lockout System – Deters covering battery compartment without installation of batteries.
  • Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every ten seconds.
  • Slide-out Battery Door Cover – Gives immediate access to batteries.
  • Test/Reset Button – Tests the unit for proper operation
  • Resets the Carbon Monoxide Alarm
  • Low Battery Signal – Alerts user when the battery needs to be replaced.
  • Green LED – Flashes every 60 seconds to indicate the unit is operating properly. The green LED will also flash before a CO reading is taken and when any button is pressed.
  • Red LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.