Key Hose RC17-600

Technical Specification
Features:
  • Make: Key Hose
  • Model code: RC17-600
  • Series: Dura-Flow
  • Response: Attack
  • Hose Size (in.): 1.75
Additional info:

The lightweight, small diameter, rubber covered attack hose that packs a big punch. The heat and chemical resistant, nitrile/PVC through-the-weave design provides peak performance and maximum flow. With a test pressure of 600 psi, Dura‑Flow clearly outperforms conventional rubber covered attack lines.A rugged, thick ribbed outer jacket construction makes the hose highly resistant to kink, impact, punctures, cuts and abrasion.Ozone resistant, maintenance-free and no drying required, make Dura-Flow a reliable weapon in a firefighter’s arsenal. NFPA compliant and UL listed. Features Lightweight, greater flexibility and virtually kink-free Raised thick rib construction, resists cuts, punctures, impact and abrasion Through-the-weave design for increased durability Heat, chemical and ozone resistant Easy to clean, easy to pack 10-year warranty Specifications Dura-Flow is made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type. Dura-Flow is guaranteed to withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg) without exposing the liner. Dura-Flow coupling options are as required by purchaser, expansion ring threaded, Storz clamp ring, etc. Barcode recess available at additional charge. The minimum burst test pressure when tested in accordance to NFPA 1961 on all Dura‑Flow diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962.  

Make Key Hose
Manufacturer Key Hose
Model code RC17-600
Series Dura-Flow
Response Attack
Hose Size (in.) 1.75
Additional info

The lightweight, small diameter, rubber covered attack hose that packs a big punch. The heat and chemical resistant, nitrile/PVC through-the-weave design provides peak performance and maximum flow. With a test pressure of 600 psi, Dura‑Flow clearly outperforms conventional rubber covered attack lines.

A rugged, thick ribbed outer jacket construction makes the hose highly resistant to kink, impact, punctures, cuts and abrasion.

Ozone resistant, maintenance-free and no drying required, make Dura-Flow a reliable weapon in a firefighter’s arsenal. NFPA compliant and UL listed.

Features

  • Lightweight, greater flexibility and virtually kink-free
  • Raised thick rib construction, resists cuts, punctures, impact and abrasion
  • Through-the-weave design for increased durability
  • Heat, chemical and ozone resistant
  • Easy to clean, easy to pack
  • 10-year warranty

Specifications

  • Dura-Flow is made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type.
  • Dura-Flow is guaranteed to withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg) without exposing the liner.
  • Dura-Flow coupling options are as required by purchaser, expansion ring threaded, Storz clamp ring, etc. Barcode recess available at additional charge.
  • The minimum burst test pressure when tested in accordance to NFPA 1961 on all Dura‑Flow diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962.
  •