JBE-2125 is an addressable output module with one feedback input designed to operate on a loop of intelligent fire detection and alarm devices with the JBE loop protocol. Each module provides one output to the fire detection system and one feedback input. The module receives activation commands from the JBE fire panel and activates its output accordingly. The feedback input can be used to monitor, from the panel, electric contact to confirm the effect of the output activation. The output can be used as an electrically isolated relay or as a 24-V active output. To be able to provide an active (24V) output, the module needs to be connected to a 24V field bus. The JBE-2125 has a fault detection feature which notifies the control panel when the input wiring is disconnected and when the output wiring has an open or short circuit. The fault detection function is only available in the active output mode. The LEDs provide local information of the output and input status to support installation inspection and troubleshooting.
| Make | Jade Bird |
|---|---|
| Manufacturer | Jade Bird |
| Model code | JBE-2125 |
| Type | Addressable Output Module with Feedback Input |
| Additional info |
JBE-2125 is an addressable output module with one feedback input designed to operate on a loop of intelligent fire detection and alarm devices with the JBE loop protocol. Each module provides one output to the fire detection system and one feedback input. The module receives activation commands from the JBE fire panel and activates its output accordingly. The feedback input can be used to monitor, from the panel, electric contact to confirm the effect of the output activation. The output can be used as an electrically isolated relay or as a 24-V active output. To be able to provide an active (24V) output, the module needs to be connected to a 24V field bus. The JBE-2125 has a fault detection feature which notifies the control panel when the input wiring is disconnected and when the output wiring has an open or short circuit. The fault detection function is only available in the active output mode. The LEDs provide local information of the output and input status to support installation inspection and troubleshooting. |