As the demand for UK housing continues to rise, developers and planning authorities are under increasing pressure to deliver the intended UK Government target of 300,000 new homes per year, by the mid-2020s.
The need to build as quickly and as cost effectively as possible, unfortunately often leaves little time to invest in developing a thorough understanding of notoriously Byzantine fire safety standards, increasing the risk of serious, potentially fatal, mistakes.
firm understanding of fire regulations
Fire safety has pride of place on the construction agenda, having been taken more seriously, following the Grenfell Tower fire. However, a collective acknowledgment of the issue alone is not sufficient. It has to be backed with clear knowledge, and a firm understanding of fire regulations should be non-negotiable for all industry professionals.
Approved Document B is commonly used by many industry professionals as guidance
Broadly speaking, the industry’s understanding of British Standards is good. However, Euroclass standards are fast becoming more widely used. You only have to look to the most recent versions of Approved Document B, Volumes 1 and 2, where Euroclass standards are referred to throughout the main text, while the British standards can only be found in the Appendix.
Approved Document B is commonly used by many industry professionals as guidance. I should stress, it’s not a fire testing document, rather it’s meant as an advisory document. As such, additional research and reading around the products specified for each project is essential.
Deciphering the differences
To help shed some light on the complex world of fire safety standards, our team of fire safety experts has compiled the table below, which concisely defines the Euroclass and UK standards, and explains how they differ.
It’s worth noting, before we get started that UK classifications don’t equate with European reaction-to-fire classifications, and vice versa.
The two sets of tests are conducted differently, each using its own methodologies and measurements. Moreover, it is important not to assume a product has met a certain standard unless it can be proven that it has been specifically tested to that standard and carries the associated certification.
| UK classifications don’t equate with European reaction-to-fire classifications, and vice versa |
| The two sets of tests are conducted differently, each using its own methodologies |
We hope this outline of the key considerations around fire safety standards has started to put your mind at ease, giving you more headspace to navigate the winding path to a robust, fire-safe project.
Read part two of this series here.