DimiLex® F is effective synthetic foaming agent based on surfactants for extinguishing fires of class A + B. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. Dimilex® F is suitable for almost all types of equipment for foaming. Certified according to EN 1568. Possibility of manufacturing according to customer requirements. High efficiency. Dimilex® F is mainly used from Fire Brigades, Oil and Gas Industry, on airports, onshore and offshore, and in locations where large fires have to be safely and reliably extinguished within a very short time. DimiLex®F is used with most commonly available low expansion foam equipment and installations for fighting fires of class A + B. It is compatible with dry chemical powders class A, B, C and D and can be used in powder/foam twin agent systems. Concentration: 6% Density at 20°C: 1.01 +/- 0,01 g/ml pH: 6.5 ÷ 8.5 Viscosity at 20°С: < 10 mm2 /s Freezing point: From -2°С to -25°С Melting point: From -1°С up to -24°С Suspended sediment (v/v): < 0,2% Storage temperature: -25°C up to + 50°С Expansion: ≤ 20 25 % drainage time: > 4.00 min.
| Make | Cervinka |
|---|---|
| Manufacturer | Cervinka - Czech Republic s.r.o. |
| Model code | DF004 |
| Type | DIMILEX® F 3% |
| Additional info |
DimiLex® F is effective synthetic foaming agent based on surfactants for extinguishing fires of class A + B. The foam forms an aqueous film that rapidly cuts off the oxygen supply and thus knocks down the fire. Dimilex® F is suitable for almost all types of equipment for foaming. Certified according to EN 1568. Possibility of manufacturing according to customer requirements. High efficiency. Dimilex® F is mainly used from Fire Brigades, Oil and Gas Industry, on airports, onshore and offshore, and in locations where large fires have to be safely and reliably extinguished within a very short time. DimiLex®F is used with most commonly available low expansion foam equipment and installations for fighting fires of class A + B. It is compatible with dry chemical powders class A, B, C and D and can be used in powder/foam twin agent systems.
Concentration: 6% Density at 20°C: 1.01 +/- 0,01 g/ml pH: 6.5 ÷ 8.5 Viscosity at 20°С: < 10 mm2 /s Freezing point: From -2°С to -25°С Melting point: From -1°С up to -24°С Suspended sediment (v/v): < 0,2% Storage temperature: -25°C up to + 50°С Expansion: ≤ 20 25 % drainage time: > 4.00 min. |