TRUCK VIPER is automatic extinguishing system and is used to protect trucks, tractors and farm vehicles. Basic informations: Volume of extinguishing agent: 1000g +/- 10g Protected area: 2m3 Length of tube: 4.1m Hose diameter: 18mm The polyamide hose is filled with the gas agent FE-200 (heptaflurpropane) and is closed. In the event of a fire, the hose will burn through at the point where the flame is created and start extinguishing the engine's protected area without causing major damage. There is no danger to the occupants of the vehicle. After extinguishing the fire, they evaporate and no extinguishing agent remains in the room. Installation of TRUCK VIPER is very easy. The product is available in two variants: without manometer including manometer for an easy check of its functionality The operating pressure at 20 ° C is 2.0 bar. When the engine is running, the pressure will increase up to 10 - 12 bar at 90 - 100 ° C. General information about TRUCK VIPER can be downloaded HERE Illustrative picture
| Make | Cervinka |
|---|---|
| Manufacturer | Cervinka - Czech Republic s.r.o. |
| Model code | 0246 |
| Additional info |
TRUCK VIPER is automatic extinguishing system and is used to protect trucks, tractors and farm vehicles. Basic informations:
The polyamide hose is filled with the gas agent FE-200 (heptaflurpropane) and is closed. In the event of a fire, the hose will burn through at the point where the flame is created and start extinguishing the engine's protected area without causing major damage. There is no danger to the occupants of the vehicle. After extinguishing the fire, they evaporate and no extinguishing agent remains in the room. Installation of TRUCK VIPER is very easy. The product is available in two variants:
The operating pressure at 20 ° C is 2.0 bar. When the engine is running, the pressure will increase up to 10 - 12 bar at 90 - 100 ° C. General information about TRUCK VIPER can be downloaded HERE |