CAT Pumps 390 with 5 frame pistol pump

Technical Specification
Features:
  • Make: CAT Pumps
  • Model code: 390
Additional info:

Features: Triplex uniflow design Lubricated wetted cups and floating pistons Mechanically actuated inlet valves Precision design 304 stainless steel valves and seats Oil bath crankcase Cylinder and sleeve wear surfaces Chrome plated, brass manifolds Chrome-moly crankshaft Oversized crankshaft bearings  Specifications: Flow: 12.0 GPM Pressure range: 100 to 600 PSI Inlet pressure (up to 8 GPM): –8.5 to + 40 PSI Inlet pressure (8 to 12 GPM):  Flooded to 40 PSI RPM: 1200 RPM Bore: 1.260" Stroke: 0.629" Maximum liquid temperature: 140°F Inlet ports (1): 1" NPTM Weight: 18.8 lbs. Dimensions: 14.3x10.0 x 5.28" Discharge ports (3): 1/2" NPTF Crankcase capacity: 21 oz. Pulley mounting: Either side Shaft diameter: 0.787"

Make CAT Pumps
Manufacturer CAT Pumps
Model code 390
Additional info

Features:

  • Triplex uniflow design
  • Lubricated wetted cups and floating pistons
  • Mechanically actuated inlet valves
  • Precision design 304 stainless steel valves and seats
  • Oil bath crankcase
  • Cylinder and sleeve wear surfaces
  • Chrome plated, brass manifolds
  • Chrome-moly crankshaft
  • Oversized crankshaft bearings

 Specifications:

  • Flow: 12.0 GPM
  • Pressure range: 100 to 600 PSI
  • Inlet pressure (up to 8 GPM): –8.5 to + 40 PSI
  • Inlet pressure (8 to 12 GPM):  Flooded to 40 PSI
  • RPM: 1200 RPM
  • Bore: 1.260"
  • Stroke: 0.629"
  • Maximum liquid temperature: 140°F
  • Inlet ports (1): 1" NPTM
  • Weight: 18.8 lbs.
  • Dimensions: 14.3x10.0 x 5.28"
  • Discharge ports (3): 1/2" NPTF
  • Crankcase capacity: 21 oz.
  • Pulley mounting: Either side
  • Shaft diameter: 0.787"