CAT Pumps 357 with 5 frame plunger pump

Technical Specification
Features:
  • Make: CAT Pumps
  • Model code: 357
Additional info:

Features: Triplex plunger design Lubricated low-pressure and hi-pressure seals Special flushed inlet manifold Oil bath crankcase Concentricity of the ceramic plunger Optional direct drive electric motor models 316 Stainless Steel or Nickel Aluminum Bronze manifolds Die cast aluminum crankcase Chrome-moly crankshaft Oversized crankshaft Specifications: Flow: 5.0 gpm Pressure range: 100 to 1500 psi RPM: 1725 rpm Inlet pressure range: Flooded to 60 psi Stroke: 0.472” Bore: 0.787” Crankcase Capacity: 18 oz Maximum liquid temperature: 160°F Inlet ports (2): 1/2” NPTF Discharge ports (2): 3/8” NPTF Shaft diameter: 0.787” Weight: 19.8 lbs Dimensions: 11.81 x 10.0 x 5.24”

Make CAT Pumps
Manufacturer CAT Pumps
Model code 357
Additional info

Features:

  • Triplex plunger design
  • Lubricated low-pressure and hi-pressure seals
  • Special flushed inlet manifold
  • Oil bath crankcase
  • Concentricity of the ceramic plunger
  • Optional direct drive electric motor models
  • 316 Stainless Steel or Nickel Aluminum Bronze manifolds
  • Die cast aluminum crankcase
  • Chrome-moly crankshaft
  • Oversized crankshaft

Specifications:

  • Flow: 5.0 gpm
  • Pressure range: 100 to 1500 psi
  • RPM: 1725 rpm
  • Inlet pressure range: Flooded to 60 psi
  • Stroke: 0.472”
  • Bore: 0.787”
  • Crankcase Capacity: 18 oz
  • Maximum liquid temperature: 160°F
  • Inlet ports (2): 1/2” NPTF
  • Discharge ports (2): 3/8” NPTF
  • Shaft diameter: 0.787”
  • Weight: 19.8 lbs
  • Dimensions: 11.81 x 10.0 x 5.24”